ISTA+ Reads Vin But Vehicle Information Does Not Populate (F95 - ENET) - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: ISTA+ Reads Vin But Vehicle Information Does Not Populate (F95 - ENET) (/showthread.php?tid=6422) |
ISTA+ Reads Vin But Vehicle Information Does Not Populate (F95 - ENET) - azm3 - 05-05-2024 **POST UPDATE** Needed to install Visual C++ Redist, both x86 and x64 versions to get working on Windows 11. As the post says, I have ISTA+ 4.39.20 installed w/ programming data trying to connect to an F95 via ENET. Connection manager reads my vin, but once it attempts to establish a connection, it does not pull any additional data. Any suggestions? Do I need an ICOM just to read data on G05/F95 platform? ENET seems to be working fine for E-SYS and Bimmer Utility. RE: ISTA+ Reads Vin But Vehicle Information Does Not Populate (F95 - ENET) - TheNine90 - 05-05-2024 most of the time its the ista setup that is incorrect. Enet should work. no need for icom RE: ISTA+ Reads Vin But Vehicle Information Does Not Populate (F95 - ENET) - azm3 - 05-09-2024 Figured out that I needed both x86 and x64 versions of the Visual C++ redistributable installed for deployment in windows 11. Working good now... |