We have recieved 54% of our goal ..


Thread Rating:
  • 4 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)
#21
(03-28-2020, 10:37 PM)Rob Wrote:
Thanks.
Reply
#22
Hmmm, the link works, prompts for decription key, but the provided password doesn't work (at least for me)…..
Reply
#23
Thank you!
Reply
#24
(04-06-2020, 07:46 AM)Doru Wrote: Hmmm, the link works, prompts for decription key, but the provided password doesn't work (at least for me)…..
Make sure Caps lock is off and all is lower case Smile
Password to all uploads is bimmerscene.com
[Image: logo.png]
Reply
#25
(04-06-2020, 01:32 PM)Rob Wrote:
(04-06-2020, 07:46 AM)Doru Wrote: Hmmm, the link works, prompts for decription key, but the provided password doesn't work (at least for me)…..
Make sure Caps lock is off and all is lower case Smile
That's what I did, but no joy. I (still) get a small window box with the following message:

"Enter Decryption key
The provided key is invalid. Please check that the key is correct or ask the creator of the link again
bimmerscene.com"


I hope I was able to attach what I get.    

I tried both chrome and edge. Any other ideas?
Reply
#26
(04-06-2020, 10:49 PM)Doru Wrote:
(04-06-2020, 01:32 PM)Rob Wrote:
(04-06-2020, 07:46 AM)Doru Wrote: Hmmm, the link works, prompts for decription key, but the provided password doesn't work (at least for me)…..
Make sure Caps lock is off and all is lower case Smile
That's what I did, but no joy. I (still) get a small window box with the following message:

"Enter Decryption key
The provided key is invalid. Please check that the key is correct or ask the creator of the link again
bimmerscene.com"


I hope I was able to attach what I get.

I tried both chrome and edge. Any other ideas?
Link is fixed please refer to OP
Password to all uploads is bimmerscene.com
[Image: logo.png]
Reply
#27
(03-28-2020, 10:37 PM)Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com
Thanks
Reply
#28
Thanks Big Grin
Reply
#29
Hello, those drivers couldnt be installed. What is wrong? I have windows 10.
Please help

Its FTDI CDM Driver Package Bus and VCP
Reply
#30
Go to device manager and update driver
Password to all uploads is bimmerscene.com
[Image: logo.png]
Reply




Users browsing this thread: 1 Guest(s)