We have recieved 83% of our goal ..


Thread Rating:
  • 9 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)
Thumbs Up 
(03-28-2020, 10:37 PM)thanks .....Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com

installation went smoothly.....wohoo
Reply
Добрый день, спасибо за раздачу
Reply
thanks for this
Reply
Wink 
(03-28-2020, 10:37 PM)Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com
[-] The following 1 user says Thank You to NolaBird for this post:
  • caspermonster
Reply
grazie per il supporto
grazie[Image: untitled.png]
Cosa è installato?
- Inpa 5.0.6 (con file di script in inglese e supporto per la serie F)
- EDIABAS 7.3.0
- NCS Expert (con menu e pulsanti in inglese e NCS Dummy Profile preinstallato)
- Manichino NCS 4.0.1
- Strumento32 4.0.3
- WinKFP 5.3.1
- Integrato SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (da utilizzare in alternativa a NCS Dummy, o per aggiornare i file DATEN man mano che se ne rendono disponibili di nuovi)
- Driver USB per cavo
Perché questo è vantaggioso?
- Una singola installazione installerà TUTTI i programmi necessari per la codifica e la diagnosi, aggiornerà i programmi per mostrare i menu in inglese, imposterà NCSExpert con il profilo NCSDummy corretto, installerà automaticamente i driver USB e viene integrato con SP-DATEN 53.3 (SI , integrato!)
- Tutte le ultime versioni dei programmi in un unico file di installazione pulito
- Nessuna caccia o ricerca di SP-DATEN quindi difficoltà a importarli
- Dimensione file PICCOLA. L'intero pacchetto è solo 170 MB!! Non è necessario scaricare 15 GB di file DATEN.
- Variabili PATH dell'ambiente di sistema gestite dall'installatore
- Driver USB incluso e installato automaticamente (e ha capito se hai bisogno del driver a 32 bit o 64 bit da solo)
L'UNICA cosa che gli utenti potrebbero dover fare è riconfigurare la loro porta COM in modo che sia COM1 dopo l'installazione, ma dopo l'installazione viene visualizzato un file Leggimi con semplici istruzioni.
Credito speciale: a stylinmike di Edmonton per aver creato uno strumento essenziale per tutti i programmatori che cercano di creare la codifica della serie E senza bisogno di un enorme file DATEN, questo è il massimo per l'impostazione della codifica della serie E resa facile.
[nascondi]Il contenuto è nascosto! Si prega di controllare il post originale per vederlo.[/hide][/font][/size][/color]
La password è bimmerscene.com
Reply
Thank you mean!
Reply
Cant see a download link?
Reply
You. Are. The. MAAAANNNNNN!!!  Cool Cool Big Grin

(06-14-2021, 08:35 PM)capo29 Wrote: Cant see a download link?

I see that you replied to the post, which is necessary to view the link. Make sure you go back to the very first page at the very top (the original post) and you should see the link in blue. I literally just did this and it appeared. Downloading successfully now. Hope this helps.  Smile
Reply
(03-28-2020, 10:37 PM)Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com
replying to say thanks!
Reply
Thank you sir. Can't wait to test.
Reply




Users browsing this thread: 6 Guest(s)