ISTA Screen not fit

[autocar20]

Dear Members,

I successfully installed ISTA and when opening ISTA it does not fit my deskstop screen. When I maximized it, it take all the desktop, it also covers the taskbar.  Any idea how to fix it?
See attached picture.

Thanks

[kioji41]

The most simple method is to move taskbar on the right of desktop.

[XuLeTZ]

Dear Members,

I successfully installed ISTA and when opening ISTA it does not fit my deskstop screen. When I maximized it, it take all the desktop, it also covers the taskbar.  Any idea how to fix it?
See attached picture.

Thanks

 * resolution can be changed in the ISTAGUI.exe.config

Did you try to set it as 800*600
go to: D:\Rheingold\TesterGUI\bin\Release and open ISTAGUI.exe.config with notepad and find resolution. Change it to something smaller than your screen resolution.

This should fix your issue. Answered in the chat as well

<!-- resolution, change it if needed -->
    <add key="BMW.Rheingold.ISTAGUI.Height" value="800" />
    <add key="BMW.Rheingold.ISTAGUI.Width" value="1024" />

The 2 values needs to be changed.
You can change them both or only the height, as that`s what`s bothering you

[autocar20]

Dear Members,

I successfully installed ISTA and when opening ISTA it does not fit my deskstop screen. When I maximized it, it take all the desktop, it also covers the taskbar.  Any idea how to fix it?
See attached picture.

Thanks

 * resolution can be changed in the ISTAGUI.exe.config

Did you try to set it as 800*600
go to: D:\Rheingold\TesterGUI\bin\Release and open ISTAGUI.exe.config with notepad and find resolution. Change it to something smaller than your screen resolution.

This should fix your issue. Answered in the chat as well

<!-- resolution, change it if needed -->
    <add key="BMW.Rheingold.ISTAGUI.Height" value="800" />
    <add key="BMW.Rheingold.ISTAGUI.Width" value="1024" />

The 2 values needs to be changed.
You can change them both or only the height, as that`s what`s bothering you

Thanks for the reply, unfortunately I cannot see Resolution in the file. I uploaded it, Please can you show me where to add the key.
Thanks

[apollo1965]

I had the same problem. My fix was to go to display settings (windows 10) and reduce scale and layout down to 250% from 300%

[autocar20]

I had the same problem. My fix was to go to display settings (windows 10) and reduce scale and layout down to 250% from 300%

I did not find it.

[toadstone]

This is what I solved my problem:
Go to windows 10 Desttop right click → Display Setting → Scale and layout → Advanced scaling and setting → 145 ( 150% Recommended) and done.
Display Resolution 1920 x 1080 Recommended doesn't need to change.

[ohmycars]

does it only accept certain resolutions then or why cant i add those lines into the ini and get an exact resolution for it? i tried 1200x1600, but its still the same very small like the previous default

[TiAg]

Dear Members,

I successfully installed ISTA and when opening ISTA it does not fit my deskstop screen. When I maximized it, it take all the desktop, it also covers the taskbar.  Any idea how to fix it?
See attached picture.

Thanks

Double click in top bar will full screen it. No reason to mess with res settings