We have recieved 83% of our goal ..


Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NBT EVO RETROFIT NAVIGATION GREY hutool
#1
Hi there guys
i installed my idrive 4 and got no signal
once i coded the vin and updated with new caf file it worked
i coded my idrive4 in with the vin and now the navigation is grey

i used the hutool 2.6 to generate the fsc codes
i put the bin file in the usb and the system did reboot itself and looks 
to be patched
now please could someone send a guide on how to load the fsc codes
generated by hutool.
thanks in advance
Reply
#2
Hi,
Once you patched your unit with the bin, the FSc codes should autoload.
You can verify their status with E-sys.
Now you need to upload map data to the unit using usb stick.
Password to all uploads is bimmerscene.com
[-] The following 1 user says Thank You to Alec01 for this post:
  • Rob
Reply
#3
Is it safe to use HU Tool 2.6 for this?
[-] The following 1 user says Thank You to JD_RFTR for this post:
  • osama11
Reply
#4
(08-28-2020, 03:19 PM)JD_RFTR Wrote: Is it safe to use HU Tool 2.6 for this?
вот


Attached Files
.pdf   evo_fsc_ru.pdf (Size: 588.68 KB / Downloads: 973)
[-] The following 1 user says Thank You to Dina_mit for this post:
  • JD_RFTR
Reply
#5
(11-05-2020, 09:54 PM)Dina_mit Wrote:
(08-28-2020, 03:19 PM)JD_RFTR  HI. MAYBE YOU HAVE ESYS MANUAL ON RUSSIAN? I SAW ATTACHMENT ON RUSS. THANK YOU Wrote: Is it safe to use HU Tool 2.6 for this?
вот
Reply
#6
(11-07-2020, 09:34 PM)dragosv6 Wrote:
(08-21-2020, 10:41 PM)teamf1 Wrote: Привет, ребята,
я установил свой idrive 4 и не получил сигнала, как
только я закодировал vin и обновил новый файл caf, он работал,
я закодировал свой idrive4 с помощью vin, и теперь навигация серая

Я использовал hutool 2.6 для генерации кодов fsc
Я поместил bin-файл на USB-накопитель, и система перезагрузилась, и теперь, похоже, 
ее исправят,
пожалуйста, не мог бы кто-нибудь отправить руководство о том, как загружать коды fsc,
сгенерированные hutool.
заранее спасибо
Вы не можете использовать HU-TOOL2.6 для ID4 FSC.
Это не сработает! HU-Tool 2.6 работает только с ID5 / 6 CIC и NBT.

Я пробовал использовать 3 разные версии ID4, и ни одна из них не работала с HU-TOOL 2.6.
Почему бы вам не перепрограммировать ID4 на ID6?
Все работает, нужно правильно выбрать регион и критерий времени. Проверено!!!
Reply
#7
(11-17-2020, 03:44 PM)Dina_mit Wrote:
(11-07-2020, 09:34 PM)dragosv6 Wrote:
(08-21-2020, 10:41 PM)teamf1 Wrote: Привет, ребята,
я установил свой idrive 4 и не получил сигнала, как
только я закодировал vin и обновил новый файл caf, он работал,
я закодировал свой idrive4 с помощью vin, и теперь навигация серая

Я использовал hutool 2.6 для генерации кодов fsc
Я поместил bin-файл на USB-накопитель, и система перезагрузилась, и теперь, похоже,
ее исправят,
пожалуйста, не мог бы кто-нибудь отправить руководство о том, как загружать коды fsc,
сгенерированные hutool.
заранее спасибо
Вы не можете использовать HU-TOOL2.6 для ID4 FSC.
Это не сработает! HU-Tool 2.6 работает только с ID5 / 6 CIC и NBT.

Я пробовал использовать 3 разные версии ID4, и ни одна из них не работала с HU-TOOL 2.6.
Почему бы вам не перепрограммировать ID4 на ID6?
Все работает, нужно правильно выбрать регион и критерий времени. Проверено!!!
привет! у меня вопрос поставил нбт evo id 4 прошитую в id 6 все работает ,карпелй,нави и так далее . У меня бмв ф10 01\13 год. На панеле ассистентов придуприждение о наезде включено , но в нбт ево не могу виставить дистанцию (пункт в меню есть но галочку не поставить ). Придуприждения на приборку выскакивает, но машына не подтормаживает!
Может кто то ставлкивался с этим ?
Reply
#8
(11-07-2020, 09:34 PM)dragosv6 Wrote:
(08-21-2020, 10:41 PM)teamf1 Wrote: Hi there guys
i installed my idrive 4 and got no signal
once i coded the vin and updated with new caf file it worked
i coded my idrive4 in with the vin and now the navigation is grey

i used the hutool 2.6 to generate the fsc codes
i put the bin file in the usb and the system did reboot itself and looks 
to be patched
now please could someone send a guide on how to load the fsc codes
generated by hutool.
thanks in advance
You cannot use HU-TOOL2.6 for ID4 FSC
It wouldn't work! HU-Tool 2.6 works only with ID5/6 CIC and NBT

I tried with 3 different ID4 versions and neither of them worked with HU-TOOL 2.6
Why don;t you flash the ID4 to ID6?
Can you give me some info how to do that?
Reply
#9
I have this file usb: UPD44044.BIN

Is this correct? For NBT EVO ID5
Reply
#10
(11-05-2020, 09:54 PM)Dina_mit Wrote:
(08-28-2020, 03:19 PM)JD_RFTR Wrote: Is it safe to use HU Tool 2.6 for this?
вот
а вот это круто, спасибо!
Reply




Users browsing this thread: 1 Guest(s)