We have recieved 83% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
use Ista-D to read the gas level
#1
Is there a way to read how much gas left on the tank use Ista-D? My cluster is having problem, and i want to know how much gas is still there while trying to find out what's wrong with my cluster.

Thanks!
Reply
#2
kombi,ecu functions look for tank level and triger component.
[-] The following 1 user says Thank You to Shiraz for this post:
  • seattleweather
Reply
#3
(05-04-2021, 03:25 PM)Shiraz Wrote: kombi,ecu functions look for tank level and triger component.
How to do that in Software and read the values in Ista+? Sorry, just started to learn Ista+
Reply
#4
What car and what is the problem with the cluster?
Reply
#5
(05-04-2021, 06:27 PM)Shiraz Wrote: What car and what is the problem with the cluster?
2014 X3 X28I (F25). Only speedometer works, rest gauge (fuel, RPM, temp) are not working. Want to check how much gas in my tank. Thanks
Reply
#6
Not sure if you will be able to get a reading of the cluster via ista since all of those readings are not being displayed.you can always try and read the value of EKPS fuel pump control module.after ista does the scan and displays all of the modules click on that module and call up ecu functions go to general and search for quantity.other option till you repair it will be to monitor miles between fill ups.
[-] The following 1 user says Thank You to Shiraz for this post:
  • seattleweather
Reply
#7
(05-04-2021, 07:58 PM)Shiraz Wrote: Not sure if you will be able to get a reading of the cluster via ista since all of those readings are not being displayed.you can always try and read the value of EKPS fuel pump control module.after ista does the scan and displays all of the modules click on that module and call up ecu functions go to general and search for quantity.other option till you repair it will be to monitor miles between fill ups.
I tried today and it indeed display the fuel in the tank.ECU can get the value, but cluster could not display. What could be the problem?
Reply
#8
Whats the fault codes with the cluster?
Reply
#9
(05-06-2021, 01:17 PM)Shiraz Wrote: Whats the fault codes with the cluster?
E1146C       No message (display, longitudinal dynamics management 2, 0x289), receiver KOMBI, transmitter ICM 53479 
E1147C       No message (alive counter, telephone, 0xC1), receiver KOMBI, transmitter TCB 53479
E12C3D       DSC interface (message from CBS partner BBV): Signal invalid 53479
E12C19       Signal (seat occupancy seat belt buckle contact status, 0x297) invalid, transmitter ACSM 53479
E1149E       No message (road sign identification, 0x287), receiver KOMBI, transmitter KAFAS 53479
E12C3E       DSC interface (message from CBS partner BBH): Signal invalid 53479
E114B4       No message (status, vehicle self-levelling suspension, 0x26A), receiver KOMBI, transmitter EHC 53479
E114E8       No message (display, driver assist system check control, 0x30D), receiver KOMBI, transmitter ICM/SAS 53479
E114E7       No message (vehicle condition, 0x3C), receiver instrument cluster, transmitter ZGM/BDC-ZGM 53479
Reply
#10
(05-06-2021, 04:58 PM)seattleweather Wrote:
(05-06-2021, 01:17 PM)Shiraz Wrote: Whats the fault codes with the cluster?
E1146C       No message (display, longitudinal dynamics management 2, 0x289), receiver KOMBI, transmitter ICM 53479 
E1147C       No message (alive counter, telephone, 0xC1), receiver KOMBI, transmitter TCB 53479
E12C3D       DSC interface (message from CBS partner BBV): Signal invalid 53479
E12C19       Signal (seat occupancy seat belt buckle contact status, 0x297) invalid, transmitter ACSM 53479
E1149E       No message (road sign identification, 0x287), receiver KOMBI, transmitter KAFAS 53479
E12C3E       DSC interface (message from CBS partner BBH): Signal invalid 53479
E114B4       No message (status, vehicle self-levelling suspension, 0x26A), receiver KOMBI, transmitter EHC 53479
E114E8       No message (display, driver assist system check control, 0x30D), receiver KOMBI, transmitter ICM/SAS 53479
E114E7       No message (vehicle condition, 0x3C), receiver instrument cluster, transmitter ZGM/BDC-ZGM 53479
Did you do any firmware updates with E-SYS ?
Reply




Users browsing this thread: 2 Guest(s)