02-10-2022, 04:26 PM
Hi guys,
I've noticed that on the F60 Mini Countryman SE, the ICAM2 (06) is recognised as TFM2 (1d) on E-sys 3.36.2. So now I can't 'detect CAF for swe'.
I've done this retrofit before on a '17 F60 Cooper S and E-sys recognises it correctly as ICAM2. (even swapped the camera's to check)
I've checked another Countryman SE with reverse camera from the factory, E-sys also recognises this one as TFM2.
I've also checked with ISTA and both get recognised correctly as TRSVC.
The camera works in all cases, but I would like to be able to code this to the vehicle without having the "no coding data" error in ISTA, any ideas?
I've noticed that on the F60 Mini Countryman SE, the ICAM2 (06) is recognised as TFM2 (1d) on E-sys 3.36.2. So now I can't 'detect CAF for swe'.
I've done this retrofit before on a '17 F60 Cooper S and E-sys recognises it correctly as ICAM2. (even swapped the camera's to check)
I've checked another Countryman SE with reverse camera from the factory, E-sys also recognises this one as TFM2.
I've also checked with ISTA and both get recognised correctly as TRSVC.
The camera works in all cases, but I would like to be able to code this to the vehicle without having the "no coding data" error in ISTA, any ideas?