Hi Gents,
Hope all is well.. just wondering if anyone know the Typeschlussel for F13 640D 2015 reg i have added the VO 9XA & 920 and seen that 640d uses same as 535D however the gear starts at D3 not D1
Anyone shed some light please.
Many Thanks
You will have error in ISTA from GWS i think.Your soft on the EGS is to new now for the rest of car. Flash ZGW to new iLevel also. Better whole car.
(09-05-2022, 06:38 AM)svenson Wrote: [ -> ]You will have error in ISTA from GWS i think.Your soft on the EGS is to new now for the rest of car. Flash ZGW to new iLevel also. Better whole car.
what about the typechlussel is that correct as its starting from D3 gear not D1
All the isteps been updated to latest psdz data
You can use F11 or F10 Typecode for F13. Same gearbox and egs software. Post or send your svt_ist from "Read ecu"
Many thanks will give this a try..
Much appreciated buddy
After flashing you will need to clear all faults with ISTA and the car will not be stuck in 3rd gear anymore.
(09-07-2022, 09:22 PM)Iir655 Wrote: [ -> ]After flashing you will need to clear all faults with ISTA and the car will not be stuck in 3rd gear anymore.
i believe this is where i was going wrong.. thank you!!
sorry to revive a old post has anyone done a Alpina Flash to F15 before?