Hello guys,
I have issue with my BMW E46 330d DDE 4.0 after failed coding retrofit equipment with ISTA-P. After 1min coding DDE red cross pops up
and when coding all other modules finish I did not see DDE on ISTA-P tree. After that I tried program DDE again but I had only replace option. I thought that that will resolve issue and I tried replace procedure. Procedure finished successful but now I can not program DDE (DDE is visible in ISTA-P but line is grey) - always error pops up. I tried with with ISTA-P and WINKFP. Communication error (I do not have reports - I will paste reports latter). Does somebody have idea how to solve that problem? Is there problem with my cable (I have Dcan cable) or cable settings? DDE is not even visible in ISTA D. When I use INPA to see DDE config I can see VIN and control unit numbers (7788470, 7758464, 7788469) but other informations are just some symbols....
Any help or piece of information will be appreciated.
Best regards
This is from WINKFP
17:32:27.232] [2023-08-17] [--] 1020 Error COAPIKF.CPP coapiKfInit 31
[17:32:27.232] [2023-08-17] [--] File could not be opened for reading info.eng
================================================================================
[17:33:12.007] [2023-08-17] [<WinKFP Tool 32B] 1000 Error COAPI2.CPP coapiRunCabd 1
[17:33:12.007] [2023-08-17] [<WinKFP Tool 32B] Error
================================================================================
[17:34:59.704] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:34:59.704] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
[17:34:59.705] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:34:59.705] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
================================================================================
[17:34:59.708] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:34:59.708] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) GET_DIAG_PROT
[17:34:59.709] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:34:59.709] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) GET_DIAG_PROT
================================================================================
[17:35:19.639] [2023-08-17] [<WinKFP Tool] 4309 Error DLOREAD.C dlGetLongFromRecord 1
[17:35:19.639] [2023-08-17] [<WinKFP Tool] Too many databytes per record
================================================================================
[17:35:21.300] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:35:21.300] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
[17:35:21.301] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:35:21.301] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
================================================================================
[17:35:31.784] [2023-08-17] [<WinKFP Tool] 2021 Error LFCDHDIA.CPP (10DDE40.IPS/IPO) CDHapiResultText 1
[17:35:31.784] [2023-08-17] [<WinKFP Tool] Datatransmission to ECU disturbed IFH-0010: Datatransmission to controlunit disturbed 12DDE40
[17:35:31.785] [2023-08-17] [<WinKFP Tool] 2021 Error COAPI2.CPP coapiRunCabd 6
[17:35:31.785] [2023-08-17] [<WinKFP Tool] Datatransmission to ECU disturbed SG_PROGRAMMIEREN
[17:35:31.785] [2023-08-17] [<WinKFP Tool] 2021 Error COAPIKF.CPP coapiKfProgSgD2 19
[17:35:31.785] [2023-08-17] [<WinKFP Tool] Datatransmission to ECU disturbed
================================================================================
[17:38:59.885] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.885] [2023-08-17] [<WinKFP Tool] Error ID_COD_INDEX
[17:38:59.885] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.885] [2023-08-17] [<WinKFP Tool] Error ID_DIAG_INDEX
[17:38:59.886] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.886] [2023-08-17] [<WinKFP Tool] Error ID_VAR_INDEX
[17:38:59.886] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.886] [2023-08-17] [<WinKFP Tool] Error ID_DATUM
[17:38:59.886] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.886] [2023-08-17] [<WinKFP Tool] Error ID_LIEF_TEXT
[17:38:59.887] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.887] [2023-08-17] [<WinKFP Tool] Error ID_SW_NR_MCV
[17:38:59.887] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.887] [2023-08-17] [<WinKFP Tool] Error ID_SW_NR_FSV
[17:38:59.888] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.888] [2023-08-17] [<WinKFP Tool] Error ID_SW_NR_OSV
[17:38:59.888] [2023-08-17] [<WinKFP Tool] 1000 Error CDHPAR.CPP CDHGetCabdPar 1
[17:38:59.888] [2023-08-17] [<WinKFP Tool] Error ID_SW_NR_RES
================================================================================
[17:38:59.890] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:38:59.890] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SG_PHYS_HWNR_LESEN
[17:38:59.890] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:38:59.890] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SG_PHYS_HWNR_LESEN
================================================================================
[17:39:15.973] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:39:15.973] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SG_INNENTEMP_LESEN
[17:39:15.974] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:39:15.974] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SG_INNENTEMP_LESEN
================================================================================
[17:39:43.348] [2023-08-17] [<WinKFP Tool] 2024 PABD/CABD 10DDE40.IPS DDE40BaudrateLesen 1
[17:39:43.348] [2023-08-17] [<WinKFP Tool] Error baudrate not readable 12DDE40, BAUDRATEN_LESEN: ERROR_ECU_SUBFUNCTION_NOT_SUPPORTED_INVALID_FORMAT
[17:39:43.349] [2023-08-17] [<WinKFP Tool] 2024 Error COAPI2.CPP coapiRunCabd 6
[17:39:43.349] [2023-08-17] [<WinKFP Tool] Error baudrate not readable BAUDRATE_LESEN
================================================================================
[17:39:51.522] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:39:51.522] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) ABGLEICHWERTE_LESEN
[17:39:51.522] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:39:51.522] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) ABGLEICHWERTE_LESEN
[17:39:51.522] [2023-08-17] [<WinKFP Tool] 1063 Error COAPIKF.CPP coapikfDDeAbgleichwerteLesen 7
[17:39:51.522] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) cannot run PABD
[17:39:51.567] [2023-08-17] [<WinKFP Tool] 995073 Interpreted 10DDE40.IPS cabimain 0
[17:39:51.567] [2023-08-17] [<WinKFP Tool] Interpretierter Fehler: DDeAbgleichwerte Lesen: cannot run PABD.
================================================================================
[17:40:02.406] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:40:02.406] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) VS20_MODE
[17:40:02.407] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:40:02.407] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) VS20_MODE
================================================================================
[17:41:29.788] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:41:29.788] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) GET_DIAG_PROT
[17:41:29.789] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:41:29.789] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) GET_DIAG_PROT
================================================================================
[17:42:43.136] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:42:43.136] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
[17:42:43.137] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:42:43.137] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
================================================================================
[17:42:43.247] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:42:43.247] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
[17:42:43.247] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:42:43.247] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
================================================================================
[17:42:58.016] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:42:58.016] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
[17:42:58.016] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:42:58.016] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
================================================================================
[17:42:58.019] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:42:58.019] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) GET_DIAG_PROT
[17:42:58.020] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:42:58.020] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) GET_DIAG_PROT
================================================================================
[17:43:43.336] [2023-08-17] [<WinKFP Tool] 4309 Error DLOREAD.C dlGetLongFromRecord 1
[17:43:43.336] [2023-08-17] [<WinKFP Tool] Too many databytes per record
================================================================================
[17:43:49.459] [2023-08-17] [<WinKFP Tool] 1063 PABD/CABD 10DDE40.IPS cabimain 1
[17:43:49.459] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
[17:43:49.460] [2023-08-17] [<WinKFP Tool] 1063 Error COAPI2.CPP coapiRunCabd 6
[17:43:49.460] [2023-08-17] [<WinKFP Tool] CABD parameter error (CABD calling parameter) SET_ECU_ADDRESS
================================================================================
[17:44:00.272] [2023-08-17] [<WinKFP Tool] 2021 Error LFCDHDIA.CPP (10DDE40.IPS/IPO) CDHapiResultText 1
[17:44:00.272] [2023-08-17] [<WinKFP Tool] Datatransmission to ECU disturbed IFH-0010: Datatransmission to controlunit disturbed 12DDE40
[17:44:00.273] [2023-08-17] [<WinKFP Tool] 2021 Error COAPI2.CPP coapiRunCabd 6
[17:44:00.273] [2023-08-17] [<WinKFP Tool] Datatransmission to ECU disturbed SG_PROGRAMMIEREN
[17:44:00.274] [2023-08-17] [<WinKFP Tool] 2021 Error COAPIKF.CPP coapiKfProgSgD2 19
[17:44:00.274] [2023-08-17] [<WinKFP Tool] Datatransmission to ECU disturbed
And ECU data
Entries of the user info field:
--------------------------------------
Entry 1:
Vehicle identification number: WBAEL91040PAXXXXX
Date: 20.09.01
Change index: CA
Software number: 7788470
Office number: 7785464
Assembly identification number: 7788469
Seral number: 42324
Program number: 00c001
Kilometer: 0
Dealer number: 12321
--------------------------------------
End of user info field
Entries of data reference:
--------------------------------------
ECU identifier: 000
Project: 07900
Program version: C001
Data version: 0000
Status: 30
--------------------------------------
Entries of HW reference:
--------------------------------------
ECU identifier: 000
Project: 07900
Status: 11
--------------------------------------
Entries of ZIF:
--------------------------------------
ECU identifier: ˙˙˙
Project: ˙˙˙˙˙
Program version: ˙˙˙˙
BMW hardware number: ˙˙˙˙˙˙˙
BMW program version: ˙˙˙˙˙˙˙
Status: FF
--------------------------------------
Entries of ZIF-Backup:
--------------------------------------
ECU identifier: 000
Project: 07900
Program version: C001
BMW hardware number: 7788310
BMW program version: 7788310
Status: 30
--------------------------------------
ECU-Status: 0C
--------------------------------------