Hi,
I have F010-11-03-512 I-step
enet cable and e-sys 3.30.1 launcher pro 2.8.1.155
and coding is working let's say disable gong for seat belts, etc.
but for disabling auto start/stop function in CAS unit the car is still acting like before.
from cheatcodes I can see parameter TC_MSA_DEFAULT_OFF set as AKTIV
but in my unit I don't have, or I dont see it...
There is present just something like TC_RESERVED_BYTE3_BIT4
should I firstly update firmware in CAS unit or even whole car to newer I-step? Which one is recommended? Or what should be wrong?
Thanks for any suggestions...
the esys launcher or your psdzdata are wrong
Try with another esys launcher
The value for startstop off is indeed liek you wrote in
CAS Module
TC_MSA_DEFAULT_OFF -> activ
(02-25-2024, 07:20 PM)Memedalji_ Wrote: [ -> ]the esys launcher or your psdzdata are wrong
Try with another esys launcher
The value for startstop off is indeed liek you wrote in
CAS Module
TC_MSA_DEFAULT_OFF -> activ
In another launcher I am able to see correct names, anyway... I left activated just memmory for auto stop and the button light (OFF) during driving was activated and after motor stop and car sleep / motor start is not ON
(02-25-2024, 02:46 PM)pan_sattan Wrote: [ -> ]but in my unit I don't have, or I dont see it...
There is present just something like TC_RESERVED_BYTE3_BIT4
should I firstly update firmware in CAS unit or even whole car to newer I-step? Which one is recommended? Or what should be wrong?
Thanks for any suggestions...
update fw in CAS, however you may need to update others too or CC will not work anymore
(03-18-2024, 09:19 AM)zeronoo Wrote: [ -> ] (02-25-2024, 02:46 PM)pan_sattan Wrote: [ -> ]but in my unit I don't have, or I dont see it...
There is present just something like TC_RESERVED_BYTE3_BIT4
should I firstly update firmware in CAS unit or even whole car to newer I-step? Which one is recommended? Or what should be wrong?
Thanks for any suggestions...
update fw in CAS, however you may need to update others too or CC will not work anymore
yeah, I plan to do that... waiting on power supply will arrive.
Hope that it helps
It may be somewhat annoying to disable the F11's start/stop function, especially if it's not well explained or accessible. A succinct statement might be: "It's confusing to work through the complex procedure on the F11 to turn off the start/stop mechanism. BMW's user experience might be substantially enhanced by having a simpler interface or more explicit instructions."
GB Whatsapp