Its better to flash using icom and most adapter.
make sure to flash in this configuration
63
62
A0
(04-21-2024, 02:51 PM)TheNine90 Wrote: [ -> ]Its better to flash using icom and most adapter.
make sure to flash in this configuration
63
62
A0
After fail flash MOSTGW, now icom B most not repsponding, only the system bulb flashing. How to make this configuration, now i will connect again icom and most
its easier to use ista-p for flashing.
For winkfp set the ediabas to MOST_ASYNC_ab625
(04-21-2024, 03:15 PM)TheNine90 Wrote: [ -> ]its easier to use ista-p for flashing.
For winkfp set the ediabas to MOST_ASYNC_ab625
Ista-P got an error, 94025 and cant start, now most is stuck, and I dont know what to do, if you can see remotely if neccesery I will pay for it. Upload photo now to see the errors with icom next a and b connected to most.
https://mega.nz/file/YbMWEJDA#7M3SHFr5Qs...5e96gdgArM
(04-21-2024, 03:15 PM)TheNine90 Wrote: [ -> ]its easier to use ista-p for flashing.
For winkfp set the ediabas to MOST_ASYNC_ab625
When I reat Ident with INPA, that is show's. I think the mess is already done... need really help, there is missing modules I think.
https://mega.nz/file/4PEymJBS#Oaw1BNOuCq...g1BPcfGDGc
A0 and 63 is missing from Inpa, 62 not responding..
I can have a look at it remotely
(04-21-2024, 05:49 PM)TheNine90 Wrote: [ -> ]I can have a look at it remotely
The damage is done.. it's need to be bench.. I ordered new CIC now. Most just stop responding.. and cant do anything