(10-09-2021, 12:07 PM)wesleyredhat Wrote: [ -> ] (10-09-2021, 09:44 AM)Tuerkay Wrote: [ -> ]Icam2 will be automatically changed to trsvc in svt if connected and VO coded properly.
Remove 3AG and add 5DL. VO code HU/FEM/REM/TRSVC
Tks Sr
before wiring everything and installing all cameras, just connect the TRSVC ECU and check with esys, if you can See it.
Have seen a few cases, where the TRSVC ECU wasn´t recognized although it was the right one.
(10-09-2021, 12:23 PM)Tuerkay Wrote: [ -> ] (10-09-2021, 12:07 PM)wesleyredhat Wrote: [ -> ] (10-09-2021, 09:44 AM)Tuerkay Wrote: [ -> ]Icam2 will be automatically changed to trsvc in svt if connected and VO coded properly.
Remove 3AG and add 5DL. VO code HU/FEM/REM/TRSVC
Tks Sr
before wiring everything and installing all cameras, just connect the TRSVC ECU and check with esys, if you can See it.
Have seen a few cases, where the TRSVC ECU wasn´t recognized although it was the right one.
perfect, i will connect TRSVC ECU before installing the complete kit. thank you for the warning. another question, would you have the wiring diagram for TRSVC ECU? tks
it didn't work, I connected the 2 module I have and it doesn't appear in esys, I connected the wires to FEM 51, 52 for Can and nothing of the module appears. would have any tips?
The problem is that our cars come with a FEM already KCAN3 (like ICAM). When we had the option 3AG from factory, we would have got another FEM which is sending old KCAN for TRSVC