Hi everyone.
Trying to verginize HU NBT 1d4 with tool32, but when open group file in Tool32, the job section is empty.
I anyone faced this kind of issue and how to fix it?
See attachment
Hi mate.
Before use tool32 I checked zgw search, connection is ok, same issue with any group file suitable to f30
If the HU has a too recent BTLD, it can't be virginized with tool32. You will need to find another tool.
(11-08-2020, 12:24 PM)dragosv6 Wrote: [ -> ]Yes, your computer did not sees the zgw! Or the enet cable is not good
Go to edianas- hardware-enet and use zgw search.
See if it finds something
(11-08-2020, 04:35 PM)dragosv6 Wrote: [ -> ] (11-08-2020, 04:05 PM)olegyjy Wrote: [ -> ]Hi mate.
Before use tool32 I checked zgw search, connection is ok, same issue with any group file suitable to f30
Find then in ediabas/bin/ediabas.ini and see if on the connection you have = ENET
On the first line i think.
Don’t remember exactly how it’s the file structure cause i’m not on my laptop.
Thank you. Fixed!