F82 idrive display screen - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: F82 idrive display screen (/showthread.php?tid=706) Pages:
1
2
|
F82 idrive display screen - Mantuanas - 09-11-2020 Hi everyone, I thinking upgarade 6.5 screen to 8.8 donor screen from bmw f82 toutch my car is f31 hu entrynav so I just wanna know this screen fit in my car? Thank you Regards M RE: F82 idrive display screen - Rob - 09-12-2020 @Mantuanas , Yes it will fit . Apply these 2 parameters in esys HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480 HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display RE: F82 idrive display screen - Mantuanas - 09-12-2020 (09-12-2020, 01:46 AM)Rob Wrote: @Mantuanas , Yes it will fit . thank you Rob donor screen date is 17-02-2020 my hu entrynav is 2016-mid will it really work because here is the new version I think, or the screen may not show anything blank? thank you Regards M RE: F82 idrive display screen - babyk - 09-12-2020 (09-12-2020, 05:14 AM)Mantuanas Wrote:(09-12-2020, 01:46 AM)Rob Wrote: @Mantuanas , Yes it will fit . Yes it will work, remember to code CID_Touch = Aktiv CID_Resolution = 1280 x 480 CID_Display_size = 8.8 DISPLAY_VARIANTE = breites_display RE: F82 idrive display screen - Mantuanas - 09-12-2020 Thank you babyk My hu entrynav is retrofit using donor vin on bmw website is a new software update so can I update software using usb? will after update need to code again? Thank you Regards M RE: F82 idrive display screen - babyk - 09-12-2020 (09-12-2020, 07:11 AM)Mantuanas Wrote: Thank you babyk You mean updating the Connected Drive software? Yes, sure you can update it without any issue, it will not affect the coding RE: F82 idrive display screen - Mantuanas - 09-13-2020 (09-12-2020, 09:36 AM)babyk Wrote:(09-12-2020, 07:11 AM)Mantuanas Wrote: Thank you babyk yes Drive software thank you babyk Regards M RE: F82 idrive display screen - Mantuanas - 09-17-2020 (09-12-2020, 06:09 AM)babyk Wrote:(09-12-2020, 05:14 AM)Mantuanas Wrote:(09-12-2020, 01:46 AM)Rob Wrote: @Mantuanas , Yes it will fit . Hi, I done coding on my HU_ENTRYNAV and screen still show NO SIGNAL Maybe problem is APIX1-APIX2? Different voltage? And on my HU_ENTRYNAV can’t find apix coding option I think is only on NBT and NBT EVO My HU_ENTRYNAV 2016 SCREEN 2020 EVO TOUCH Maybe cable problem? Or voltage? any ideas? THANK YOU REGARDS M RE: F82 idrive display screen - Rob - 09-17-2020 Thought you retrofitted NBT EVO as well , apologies. RE: F82 idrive display screen - Tuerkay - 09-17-2020 Correct me if i´m wrong but isn´t HU_Entrynav based on NBT (not evo)? If that´s the case, the F82 touch Screen won´t work. The Screen needs APIX2, MII interface and 12V while the HU_Entrynav supports APIX1, SPI and 9.5V |