(08-01-2021, 02:39 AM)akizalani Wrote:

(08-17-2020, 10:29 PM)XuLeTZ Wrote: This Thread is for my Standalone Releases, always latest.



If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!



ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.30.3x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.30.30.exe
|  ISTA_v4.30.30.23898.7z (required)
|  BLP_4.30.33.7z (required)
|  SDP_4.30.33.7z (if needed)
|  ExecutionBreak_4.30.33.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_4.30.30.7z (required)
        DE_4.30.30.7z (if needed)
        ZH_4.30.30.7z (if needed and if available)
        GLOBAL_4.30.30.7z (required)

Standalone: ISTA 4.30.30.23898 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.30.30 / BLP 4.30.33 / SDP 4.30.33
Standalone Installer (all above files/dirs must be present in the same directory):  v4.30.30
PSdZData Lite: v4.30.33


Standard Tools Installer v2.12.1 (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

thankss!!

(08-02-2021, 01:49 AM)azharkamal85 Wrote:

(07-30-2021, 06:06 PM)RIZWAN.ISA Wrote:

(07-24-2021, 08:43 AM)bimmerscenemat Wrote:

(09-04-2020, 10:32 AM)wlodar.wsz Wrote:

(08-17-2020, 10:29 PM)XuLeTZ Wrote: Thanks to Sedoy from CT 

---

thanks

(09-03-2020, 05:17 PM)Rob Wrote: Google Drive LINK ADDED

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

(03-24-2024, 08:23 AM)Mousietrfc Wrote: Thanks for everyone’s contribution here. I’m downloading now, so hopefully my install goes OK. I’m attempting to use a mac with parallels..

(04-13-2024, 05:54 PM)amine1973 Wrote:

(06-22-2023, 04:02 PM)jhonn Wrote:

(08-24-2022, 10:37 PM)Rowshan Wrote:

(09-03-2020, 05:17 PM)Rob Wrote: Google Drive LINK HINZUGEFÜGT

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Danke

---

(06-22-2023, 04:02 PM)John Wrote:

(08-24-2022, 10:37 PM)Rowshan Wrote:

(09-03-2020, 05:17 PM)rauben Wrote: Google Drive LINK HINZUGEFÜGT

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Danke

Super

than you for sharing...