Bimmer Scene - Latest BMW Coding / Retrofits / Maps
VO code 5AD(LDW) - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: VO code 5AD(LDW) (/showthread.php?tid=723)

Pages: 1 2


RE: VO code 5AD(LDW) - svenson - 09-21-2020

Take a look what ZGW you have.You need a ZGW with 8port Flexray for this retrofit. Many people overlook this.


RE: VO code 5AD(LDW) - Siki78 - 09-23-2020

I don‘t have 8 port just 4 on F30 and I install 5AG without any problem. See with tool32 if you have 1 port free there.
Open ZGW_01.prg
JOB/Wert „status_flexray_pfad“
"steuern_reset_learn_flexray" or
"steuern_reset_flexray"


RE: VO code 5AD(LDW) - svenson - 09-23-2020

It's about F10, not f30. Different structure of the system. 5AG on F10 is on Flexray Port 7.


RE: VO code 5AD(LDW) - M5_F10_N_T - 10-06-2020

I have not checked what kinde of zgw I have, I know that it is the black one, will have a more close look which one.

LWD have been in the market a long time before my year modell, so hope it is the correct zgw.

Siki78 thanks will have a look at this also.

I have started install the sensor and only have the two cable left that has to go to zgw then its finished. Then vo coding left and so on.

Thanks


RE: VO code 5AD(LDW) - M5_F10_N_T - 03-17-2021

Hi guys, so today I coded 5AD to my car, coded Kombi,szl,icm,cic,kafas,frm,cas,jbbf, took the most that would be needed. Everything whent well until I pushed the button on the side for 5AD, and I got an error. The error when reading with ista says this codes:

030490: Steering wheel electronics module(LRE) Missing LIN slave
D01903: Signal(steering wheel vibration,268.0.4) invalid, transmitted by FEM/SZL/BDC-
800A07: Vibration motor in steering wheel wheel faulty

I appreciate all help


RE: VO code 5AD(LDW) - M5_F10_N_T - 03-26-2021

Update: So found what was missing and it was 2 wires from behinde SZL to JBBF module. Now it works. Thanks guys Smile