(09-03-2020, 05:17 PM)Rob Wrote: Google Drive LINK ADDED

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

(08-17-2020, 10:29 PM)XuLeTZ Wrote: Thanks to @Sedoy  for this amazing package!
This Thread is for the Standalone Releases, always latest.



Please download 4.32.1x and not the 4.32.2x or newer as the license is personalized and bind to the hardware of PC.
If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!




ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.30.4x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_x.exe
|  ISTA_vx.7z (required)
|  BLP_x.7z (required)
|  SDP_x.7z (if needed)
|  ExecutionBreak_x.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_x.7z (required)
        DE_x.7z (if needed)
        ZH_x.7z (if needed and if available)
        GLOBAL_x.7z (required)

Standalone: ISTA  / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 
Standalone Installer (all above files/dirs must be present in the same directory):  
PSdZData Lite: 


Standard Tools Installer v2.12.2 (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

(02-19-2022, 02:11 PM)idriveBMW Wrote: Downloaded and installed the files from Mega. It took a while to get the larger Global file for the SQLiteDBs folder but eventually completed it. The two required language files need to be placed in the folder at the top of my picture. (Global and Eng).
Once done, I ran the installer which extracts the files, I selected add a short cut during the installation and opened ISTA from that.  This takes up considerable more space than my previous version which just had Eng language but works well and the installer makes it that bit easer as long as the folder is set up correctly. I thought this picture may help anyone who is not too computer "savvy"    (There is also a picture on the Mega downloads).  I have placed this on an external drive, my previous version ran installed on my old laptop, this needs more ram, looks to be a minimum of 4gb as a message pops up to advise there was not enough memory when I tried.

It's a great package so thank you again for posting it. 



What did you do for the license? I have 4.34.31 and it installs correctly but i cant get past the license. 

(09-03-2020, 05:17 PM)Rob Wrote: Google Drive LINK ADDED

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

(10-12-2020, 03:30 AM)GottiLee Wrote:

(08-17-2020, 10:29 PM)thank you!!!!!!!!!!!!!!!XuLeTZ Wrote: thanks
This Thread is for my Standalone Releases, always latest.

If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!

ISTA Standalone

* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Unknown terminal voltage!" message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.25.40.exe
|  ISTA_v4.25.40.21875.7z (required)
|  BLP_4.25.40.7z (required)
|  SDP_4.25.40.7z (if needed)
|
\---SQLiteDBs
        EN_4.25.40.7z (required)
        DE_4.25.40.7z (if needed)
        ZH_4.25.40.7z (if needed and if available)
        GLOBAL_4.25.40.7z (required)

Standalone: ISTA 4.25.40.21875 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.25.40 / BLP 4.25.40 / SDP 4.25.40
Standalone Installer (all above files/dirs must be present in the same directory):  v4.24.40



Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)
SP-Daten v67.1.006


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

Quote:

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.