Cannot read KOMBI2 module,why? - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Cannot read KOMBI2 module,why? (/showthread.php?tid=1057) |
Cannot read KOMBI2 module,why? - batx_lxy - 12-17-2020 I Running esys 3.30.1 with Launcher 2.8.1.155.The problem I encountered was that KOMBI2 could not be read and modified normally, and the result was all numbers. My car is 2020 X1(xDrive25Li),F49. Please tell me what's going on,Can anyone help me? Thank you very much. RE: Cannot read KOMBI2 module,why? - svenson - 12-17-2020 Your launcher is too old (or your car is too new ). Not readable with this old or free version. You must buy newest launcher or better esysx (better support). RE: Cannot read KOMBI2 module,why? - Adel -BimmerFixes- - 01-01-2021 Car not in diagnostic mode RE: Cannot read KOMBI2 module,why? - Dengus - 01-02-2021 What Psdzdata do you have? I guess they are too old. Try to update them. |