+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ėšÝ§ blanked out? (/showthread.php?tid=1196)
Pages:
1
2
ėšÝ§ blanked out? - Coolguyat18 - 01-09-2021
I guys, I am learning how to use ėšÝ§ (guide from this site) and I seem to have an issue.
I lock my ÏçØɱ.
I load ėšÝ§ (not launcher) 3.27.1
Connection by ÏçØɱ and select f25 (not direct and the top newest number)
Comfort mode and hit tal button
Read vo and activate fa and save
Read svt
Then I am ment tovto make sure my I step levels match but they are just grey and I am stuck on this and can't seem to find the issue?
Any one have some info please as learning how to updat ecu
Ryan
ėšÝ§ blanked out? - elthox - 01-09-2021
Activate Fa and use newer ėšÝ§
RE: ėšÝ§ blanked out? - Coolguyat18 - 01-09-2021
Hi there, I thought I have the latest ėšÝ§?
ėšÝ§ blanked out? - elthox - 01-09-2021
Later than 3.30
RE: ėšÝ§ blanked out? - Coolguyat18 - 01-09-2021
(01-09-2021, 04:58 PM)elthox Wrote: Activate Fa and use newer ėšÝ§
(01-09-2021, 05:38 PM)elthox Wrote: Later than 3.30
Ahh ok I see there is a link in this forum for a newer version.
I shall download that and see what happens.
Can I ask why would it blank out if an older version?
Has the software expired?
ėšÝ§ blanked out? - elthox - 01-09-2021
ėšÝ§ version and psdzdata version need to have not a big time gap between.
RE: ėšÝ§ blanked out? - Coolguyat18 - 01-09-2021
(01-09-2021, 06:26 PM)elthox Wrote: ėšÝ§ version and psdzdata version need to have not a big time gap between.
Now that makes perfect sense ?
1. My SDP (psdzdata) is 4.25.40 is this new enough to run with the new ėšÝ§ from this forum?
ėšÝ§ blanked out? - elthox - 01-09-2021
3.33.4 is fine for that version
RE: ėšÝ§ blanked out? - Coolguyat18 - 01-09-2021
I can only see ėšÝ§ version 3.30.1 on this forum in the sticky section and not 3.33.4?
ėšÝ§ blanked out? - elthox - 01-09-2021
Try 3.30 then will be ok