Frm cloning - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Frm cloning (/showthread.php?tid=1311) |
Frm cloning - ArminTZ - 02-14-2021 Hello everyone, I am new here, one question if someone can Help Me, I have Changed frm modul on x3 f25, now everything work but I have a Lot of failure, light faul, can someone Help me to code IT if is it possible with esys? Many Thanks. RE: Frm cloning - wjgud123 - 02-14-2021 Hi, If you put correct module then inject cafd to frm and code for car. Can be done in Esys. RE: Frm cloning - ArminTZ - 02-14-2021 (02-14-2021, 03:22 PM)wjgud123 Wrote: Hi, many thanks, I try IT now Frm cloning - elthox - 02-14-2021 Report back if solved. Otherwise i can assist you. RE: Frm cloning - ArminTZ - 02-14-2021 (02-14-2021, 04:45 PM)elthox Wrote: Report back if solved. Otherwise i can assist you. Solved, many thanks. RE: Frm cloning - ArminTZ - 02-15-2021 If Someone can help, I have coded it and work everything, only angeleyes doesnt work when switch is on automatic position, does it need to be coded or something else, thanks. RE: Frm cloning - svenson - 02-15-2021 You mean angeleyes for dayltime running light? You must switch on in idrive. Has nothing to do with automatic position. RE: Frm cloning - ArminTZ - 02-15-2021 (02-15-2021, 05:09 PM)svenson Wrote: You mean angeleyes for dayltime running light? You must switch on in idrive. Has nothing to do with automatic position.I forgot about it, I need to check, many thanks. |