12V Outlet Under Glove Box Install? - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5) +--- Forum: DIY Garage (https://www.bimmerscene.com/forumdisplay.php?fid=8) +--- Thread: 12V Outlet Under Glove Box Install? (/showthread.php?tid=1347) |
12V Outlet Under Glove Box Install? - Fredphilly - 02-27-2021 Hi Everyone, I have a 2017 M240i that does not have a 12V socket installed underneath the glove box, but does have the hole for the socket to go into. It looks like a fairly simple DIY, but I don't want to get into having to remove a bunch of panels and covers to wire it to the rear/trunk fuse panel. Would it be possible to wire it into a fuse of the FEM located in the passenger side footwell? I was thinking of using an add-a-circuit to a pre-existing fuse or an empty slot. I have not seen anything online regarding using the FEM, so it kind of worries me that I am missing something. Thanks for any thoughts or suggestions! RE: 12V Outlet Under Glove Box Install? - ballroom - 03-04-2021 Just an idea, make a parallel connection to the 12v socket in middle console. It would be easy to pass the cable thrue. I do not have istad working, but if you have, check electrical diagrams there, and maybe it can help you RE: 12V Outlet Under Glove Box Install? - ballroom - 03-06-2021 Hi again, please find here (https://ufile.io/825m9eii), a schematic for electrical lighter. On the right position, (usa comment), is what you need. If you like, please hit thanks. |