+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: VLD CODING (/showthread.php?tid=1610)
VLD CODING - jlin1001 - 05-18-2021
Wanting to code VLD on my '18 X3 and '16 750 (both have adaptive LED's).
Using Bimmercode, in BDC2, I found the two items that need to be enabled:
3530 LaMaster1 > C AFS ENA
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y
However, if I use E-sys/CAS 1DF8 module,
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y is nowhere to be found in either car.
At any rate, enabling both via BC didn't seem to make any changes, i.e., the left beam didn't pan in response to D or R.
Any idea?
RE: VLD CODING - JD_RFTR - 05-18-2021
U cant code it with BC. U need esys and do vo coding not fdl. U can actually do and fdl coding but there will be just too much to do, in bdc + fle, amd tms + frm, for both cars
RE: VLD CODING - Petro94 - 10-29-2023
(05-18-2021, 05:58 PM)jlin1001 Wrote: Wanting to code VLD on my '18 X3 and '16 750 (both have adaptive LED's).
Using Bimmercode, in BDC2, I found the two items that need to be enabled:
3530 LaMaster1 > C AFS ENA
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y
However, if I use E-sys/CAS 1DF8 module,
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y is nowhere to be found in either car.
At any rate, enabling both via BC didn't seem to make any changes, i.e., the left beam didn't pan in response to D or R.
Any idea?
I have the same problem with my '17 740, cannot find LUT FLC FORWARDLIGHTING Y. I did VO coding with esys, removed 5AP and 8S4. My car has 524 Adaptive Headlights, not 552.
RE: VLD CODING - TheNine90 - 11-02-2023
I have check on caf 00001DF8 LUT_FLC_FORWARDLIGHTING_Y is available. Which version is your cafd?