E87 CID - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2) +--- Thread: E87 CID (/showthread.php?tid=1641) |
E87 CID - billi03637 - 05-31-2021 Hi guys. I have a problem on bmw e87. After installing cartablet, idrive in the original menu section does not work and "no signal" comes out. Can you help me with the coding to make the disassembled monitor always open? RE: E87 CID - blackpanther - 05-31-2021 Do I understand it right that you have disassembled the flapmonitor and installed a 'cartablet' instead of the original screen? And now the monitor won't flip when you switch on ignition? RE: E87 CID - billi03637 - 06-01-2021 (05-31-2021, 07:36 PM)blackpanther Wrote: Do I understand it right that you have disassembled the flapmonitor and installed a 'cartablet' instead of the original screen? And now the monitor won't flip when you switch on ignition?The original monitor was disassembled and a cartablet was mounted keeping the original unit. If you try now to go with the hydrive in the original menu appears "no signal" because evidently when they disassembled the monitor was closed. I have to make it clear by coding that the monitor is now always open to be able to use idrive. Thanks RE: E87 CID - blackpanther - 06-01-2021 Ok. Which kind of headunit do you have? MASK (Business nav) or ccc (professional nav)? RE: E87 CID - billi03637 - 06-01-2021 (06-01-2021, 07:19 PM)blackpanther Wrote: Ok. Which kind of headunit do you have? MASK (Business nav) or ccc (professional nav)?ccc RE: E87 CID - blackpanther - 06-01-2021 @billi03637 Ok, there are some coding parameters you have to change: CCC_APP: VA_FLAP_DISPLAY_CONFIG to nicht_aktiv VA_FLAP_PHONE to nicht_aktiv VA_FLAP_CC to nicht_aktiv VA_FLAP_NAVI to nicht_aktiv VA_FLAP_SVS to nicht_aktiv VA_FLAP_HMISTART to nicht_aktiv CID_TYPE to static CCC_HST: CID_TYPE to static maybe also DISPLAY_TYPE to alpine_sharp_6_5_fixed And if you have the MULF (USB) you have to change parameters even there: ISPEECH_CID_TYPE to static ISPEECH_VA_FLAP_DICONFI to nicht_aktiv I can't promise that this will solve your problem but these parameters will let the headunit assume it operates a static display (e.g. E90). Please leave a feedback if you succeeded. |