How to Register/Code Battery E/F Series - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5) +--- Forum: DIY Garage (https://www.bimmerscene.com/forumdisplay.php?fid=8) +--- Thread: How to Register/Code Battery E/F Series (/showthread.php?tid=174) |
How to Register/Code Battery E/F Series - Rob - 04-09-2020 E SERIES: rocedure to register new battery using INPA: Step 1: select BODY from the left hand pop-up menu Step 2: select POWER MODULE in the right hand list Step 3: select ACTIVATE from the next menu Step 4: Select ACTIVATE2 from the next menu Step 5: Then select F7 - Register battery replacement. Almost instantly you get the message: "Register battery replacement Activated properly." F SERIES: In that case you open up Toolset 32 (under EDIABAS folder): 1. Open MSD80.prg 2. Look up steuern_batterietausch_registri. (near bottom of job list) 3. Go to Jobs menu 4. Select Run Job (May alternatively be under MSV70 or MSV80.prg) Also, and this is important: THIS IS ONLY FOR REGISTERING AN OEM BATTERY FROM BMW! Alternate replacements will need additional coding to match voltage etc differences RE: How to Register/Code Battery E/F Series - LLB19 - 12-07-2020 Thank you for the post but What extra coding wil it take? RE: How to Register/Code Battery E/F Series - Treiku - 02-20-2021 (12-07-2020, 07:11 PM)LLB19 Wrote: Thank you for the post but What extra coding wil it take? This write up is for registering the replacement. It applies if the new battery is the same type and with same parameters as the previous one. If you change the battery type (AGM<->lead-acid) and/or capacity you will also have to change the battery specs in VO and code modules that need it. Different models need different approach. RE: How to Register/Code Battery E/F Series - h0m3l3ss - 04-04-2021 thank you very much RE: How to Register/Code Battery E/F Series - maverx - 02-08-2022 changed the battery now I fix Upgrade thanks How to Register/Code Battery E/F Series - se9303 - 06-12-2022 I always thought the E series did not require to register the battery. Interesting Regards, Mark |