FA File - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: FA File (/showthread.php?tid=1931) |
FA File - Zombiedad - 09-20-2021 Hi guys, I think I screwed up something using the E-sys software. Does any one have the FA file for 2011 F10 535i? I flashed the DSC and not I got ABS Brake system failed. Can't find a way to fix it :-( Also the Chassis Stabilization Malfunction error. Regards Ced RE: FA File - dragosv6 - 09-20-2021 (09-20-2021, 06:28 AM)Zombiedad Wrote: Hi guys,Do you have a VIN? RE: FA File - Zombiedad - 09-20-2021 (09-20-2021, 06:31 AM)dragosv6 Wrote:Yes , it is WBAFR7C59BC608288 Thanks a lot.(09-20-2021, 06:28 AM)Zombiedad Wrote: Hi guys,Do you have a VIN? (09-20-2021, 06:31 AM)dragosv6 Wrote:(09-20-2021, 06:28 AM)Zombiedad Wrote: Hi guys,Do you have a VIN? I have attached a screen shot. I am new to this, never done any coding myself. I got the Chassis Stabilization Malfunction error everytime when I start the car, I can't switch to sport , sport +mode. Then last night when I tried using this e-sys program, I went to DSC (screen shot) and using the FA file that came with the program it saids FA Sample or something. I select F010 and it shows active. Then i went to DSC section, right click the CAFD and coded it. When it starts writing the code, I got the ABS error . Instead of trying to fix it, I rather wait cause I have no idea I what was doing lol. I just want to fix the problem. Or I should right click on DSC to code the whole section? Any help will be great. Right now lots of errors on dash. RE: FA File - Zombiedad - 09-21-2021 (09-20-2021, 06:31 AM)dragosv6 Wrote:(09-20-2021, 06:28 AM)Zombiedad Wrote: Hi guys,Do you have a VIN? Morning Dragosv6, just check and see if you get a chance to find me a FA file for my 2011 F10 535i VIN WBAFR7C59BC608288 Thanks a lot. RE: FA File - dragosv6 - 09-21-2021 (09-21-2021, 02:28 PM)Zombiedad Wrote:here u are!(09-20-2021, 06:31 AM)dragosv6 Wrote:(09-20-2021, 06:28 AM)Zombiedad Wrote: Hi guys,Do you have a VIN? https://mega.nz/file/9rZ0gTCZ#m0sO4SNTLrv1c-2uItwYmyYTLz3U8F2nmtDd1FyZGRs RE: FA File - Zombiedad - 09-21-2021 (09-21-2021, 02:35 PM)dragosv6 Wrote:(09-21-2021, 02:28 PM)Zombiedad Wrote:here u are!(09-20-2021, 06:31 AM)dragosv6 Wrote:(09-20-2021, 06:28 AM)Zombiedad Wrote: Hi guys,Do you have a VIN? Thanks for the file. I am new to this software. Do I load up this FA file you sent me. Then I can update the my car modules? RE: FA File - dragosv6 - 09-21-2021 First of all, what do you want to do? RE: FA File - Zombiedad - 09-21-2021 I got a chassis stabilization malfunction and can't find a way to fix it. Someone told me my module on the 2011 535i is old. I need to update the modules. So I downloaded the e-sys program and it came with the sameleF10 FA file. I clicked on it and activate. Then went to the DSC section and coded it. Then all in a sudden I got all the erros, like tire pressure monitor, ABS.. lots of faults showing on dash board. I probably did something wrong, I don't know how to really use the program. All I want is to set my car back to default like factory. Can I use the FA you sent me ? RE: FA File - Zombiedad - 09-22-2021 (09-21-2021, 04:26 PM)dragosv6 Wrote: First of all, what do you want to do? I got an error when reading the FA file you sent me. |