Hello from Down Under - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5) +--- Forum: New Member Intro (https://www.bimmerscene.com/forumdisplay.php?fid=6) +--- Thread: Hello from Down Under (/showthread.php?tid=2187) |
Hello from Down Under - robbert - 12-13-2021 Hello everyone, As an old retired electrical engineer, coding my F32 435i has presented many stimulating challenges. Guys on this site have been great, and I've learned so much. My coding efforts have been successful using E-Sys on an HP Windows 10 desktop, but it has been a but awkward to set it up physically where I store my car. So I've just been given an old Medion laptop running Windows 10. This should make things easier where I can sit inside the car, with the laptop on my err.. lap, and happily code away. But I'm finding the installation process much different from that used on my desktop about 4 months ago - so I'll be needing some help. Here are a few shots of my machine. RE: Hello from Down Under - Rob - 12-13-2021 Welcome to the Scene! |