ESYS Activate FA Issue - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: ESYS Activate FA Issue (/showthread.php?tid=221) |
ESYS Activate FA Issue - MobileBmwCoding - 04-11-2020 Alright guys I have a weird issue after trying to code a Cafd backup to a customers car. Customer been having issues with their FRM for a while and had some pretty heavy tunes and retrofits from other shops. The Cafd failed to complete after I click code. After that I was was trying to go through the process of flashing the FRM and learned I can no longer Activate the FA. I tried everything possible and have a backup ESYS and psdzdata program in case it was that and still got the error unable to activate FA. When I use ISTA(D) I get FRM has a short in the communication com bus. I'm going to have the customer replace the FRM but wanted to get a idea from you guys because the FRM shouldn't prevent me from activating the FA. RE: ESYS Activate FA Issue - x5m254 - 04-11-2020 Hi, i just had a similar issue the Activate FA would run for a few minutes and then fail - try clear all codes using ISTA. Sometimes there are too many errors in Central Gateway to allow FA to be activated. My problem occured on F84 - the car had just had BM3 tune and there were about 10 orange modules in ISTA. Once cleared FA activated no issues. thanks to my brother @Adel -BimmerFixes- for helping with this solution RE: ESYS Activate FA Issue - MobileBmwCoding - 04-11-2020 (04-11-2020, 09:53 PM)x5m254 Wrote: Hi, i just had a similar issue the Activate FA would run for a few minutes and then fail - try clear all codes using ISTA.I Cleared in ESYS let me try to clear in Ista(D) to see if this will fix the issue. Thanks for the info |