+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: BMW E60 Comfort Access retrofit (/showthread.php?tid=2442)
BMW E60 Comfort Access retrofit - bir40o0 - 02-21-2022
Hello guys,
I Have problem with retrofit on comfort access to my car. The car is E60 LCI, I have antenas, CA module, key and 4 handle. All of parts are mounted on te car, the CA module is coding to passive go with CAS modules, the car start engine only with button( without key in ignition lock), open the trunk when the car is lock, but don`t want to lock and unlock from handles.
If anyone have an idea, I would be grateful to share it with me.
RE: BMW E60 Comfort Access retrofit - bboctavian - 02-21-2022
Hello mate, i make in the past this retrofit. you need to read with ncs expert the ca module and coding the handles. is a option 2 handle or 4handle, and will work
RE: BMW E60 Comfort Access retrofit - bir40o0 - 02-22-2022
(02-21-2022, 09:11 PM)bboctavian Wrote: Hello mate, i make in the past this retrofit. you need to read with ncs expert the ca module and coding the handles. is a option 2 handle or 4handle, and will workHello, Thanks for you answer. The next problem is: when I read with NCS, i see the handles (all of them), but I can`t coding it. The wiring is make correctly.
RE: BMW E60 Comfort Access retrofit - bboctavian - 02-22-2022
Try to flash with winkfp the ca module first time.
RE: BMW E60 Comfort Access retrofit - bir40o0 - 02-23-2022
(02-22-2022, 10:22 PM)bboctavian Wrote: Try to flash with winkfp the ca module first time.It is alredy flash, the car run and drive without key in ignition lock. You suggest me to try to flash again CA module?
RE: BMW E60 Comfort Access retrofit - martinux - 04-09-2022
Hi, I faced with the same problem. Car runs, trunk opens, but door handles not working. Have you solved that?
RE: BMW E60 Comfort Access retrofit - neykov - 01-13-2023
Hello! I retrofitted my E60 M5 LCI comfort access. The cables are routed, the antennas are mounted, it is coded, but there is a delay when unlocking and locking (for 15 seconds it does not respond). A moment later it works fine then the same thing again. Is there a solution to this problem?