+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) (/showthread.php?tid=3)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - Andy390 - 01-15-2024
(03-28-2020, 10:37 PM)Rob Wrote:This looks great, I lost all my software after a HDD fatality!What's Installed?- Inpa 5.0.6 (with English script files & Support for F-series)- EDIABAS 7.3.0- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)- NCS Dummy 4.0.1- Tool32 4.0.3- WinKFP 5.3.1- Integrated SP-DATEN v53.3- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)- USB Drivers for cable
Why is this Beneficial?- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)- All the latest versions of the programs in one neat install file- No hunting or searching for SP-DATENs then struggling to import them- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.- System Environment PATH variables taken care of by the installer- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.You have not unlocked this post's content yet. Please reply to this thread to unlock the content.[/font][/size][/color]Password is bimmerscene.com
(03-28-2020, 10:37 PM)Rob Wrote:Hi Rob,The password doesnt work when they ask for the encryption key on MEGA. Help pleaseWhat's Installed?- Inpa 5.0.6 (with English script files & Support for F-series)- EDIABAS 7.3.0- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)- NCS Dummy 4.0.1- Tool32 4.0.3- WinKFP 5.3.1- Integrated SP-DATEN v53.3- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)- USB Drivers for cable
Why is this Beneficial?- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)- All the latest versions of the programs in one neat install file- No hunting or searching for SP-DATENs then struggling to import them- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.- System Environment PATH variables taken care of by the installer- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.You have not unlocked this post's content yet. Please reply to this thread to unlock the content.[/font][/size][/color]Password is bimmerscene.com
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - Mr_E85Bim - 01-15-2024
thank you very much for sharing this!
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - patrickr0689 - 01-15-2024
Thank you very much!
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - hassaracker - 01-16-2024
Thanks, needed the download.
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - Memedalji_ - 01-16-2024
(03-28-2020, 10:51 PM)F90M5Boi Wrote: Thanks!
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - rewers00 - 01-17-2024
(03-28-2020, 10:37 PM)Rob Wrote:ThanksWhat's Installed?- Inpa 5.0.6 (with English script files & Support for F-series)- EDIABAS 7.3.0- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)- NCS Dummy 4.0.1- Tool32 4.0.3- WinKFP 5.3.1- Integrated SP-DATEN v53.3- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)- USB Drivers for cable
Why is this Beneficial?- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)- All the latest versions of the programs in one neat install file- No hunting or searching for SP-DATENs then struggling to import them- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.- System Environment PATH variables taken care of by the installer- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.You have not unlocked this post's content yet. Please reply to this thread to unlock the content.[/font][/size][/color]Password is bimmerscene.com
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - itsfun - 01-17-2024
(03-28-2020, 10:37 PM)Rob Wrote:Thanks
What's Installed?- Inpa 5.0.6 (with English script files & Support for F-series)- EDIABAS 7.3.0- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)- NCS Dummy 4.0.1- Tool32 4.0.3- WinKFP 5.3.1- Integrated SP-DATEN v53.3- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)- USB Drivers for cable
Why is this Beneficial?- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)- All the latest versions of the programs in one neat install file- No hunting or searching for SP-DATENs then struggling to import them- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.- System Environment PATH variables taken care of by the installer- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.You have not unlocked this post's content yet. Please reply to this thread to unlock the content.[/font][/size][/color]Password is bimmerscene.com
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - BAddOg2k - 01-17-2024
Thank you for the work!
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - Nerox - 01-17-2024
Thanks a lot ! Perfect for my new install from scratch on my diag Laptop
RE: Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY) - waza040421 - 01-18-2024
(02-16-2021, 06:00 PM)Mariuscristian Wrote: ThanksRob
What's Installed?- Inpa 5.0.6 (with English script files & Support for F-series)- EDIABAS 7.3.0- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)- NCS Dummy 4.0.1- Tool32 4.0.3- WinKFP 5.3.1- Integrated SP-DATEN v53.3- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)- USB Drivers for cable
Why is this Beneficial?- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)- All the latest versions of the programs in one neat install file- No hunting or searching for SP-DATENs then struggling to import them- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.- System Environment PATH variables taken care of by the installer- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.You have not unlocked this post's content yet. Please reply to this thread to unlock the content.[/font][/size][/color]Password is bimmerscene.comThank you!