Help needed - changing ENTRYNAV HU - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Help needed - changing ENTRYNAV HU (/showthread.php?tid=3270) |
Help needed - changing ENTRYNAV HU - maxxsp - 10-24-2022 Hey guys, I have a BMW F45 with ENTRYNAV without MOST port. I wish to change to another ENTRYNAV HU with MOST port so I can retrofit 6WA kombi. Is it possible to exchange the headunit and use FSC repair kit from the old HU to the new HU? Can anyone guide me how to do this? Need to virginize the donor HU first? RE: Help needed - changing ENTRYNAV HU - adelin731 - 04-20-2023 have you managed to do the swap? RE: Help needed - changing ENTRYNAV HU - maxxsp - 05-26-2023 (04-20-2023, 02:08 AM)adelin731 Wrote: have you managed to do the swap? Yes I bought a used ENTRYNAV with MOST port. First I cleared FSC, VIN with Tool32 Then injected CAFD and coded with E-SYS Used E-SYS to add FSC from FSC Repair kit Everything works except I don't have older map file (<2018) to activate navigation. Because my repair kit FSC for the map is too old RE: Help needed - changing ENTRYNAV HU - adelin731 - 05-26-2023 (05-26-2023, 03:35 AM)maxxsp Wrote:I swapped my head unit also, but I got the hu_champ2 and I'm not able to get the navigation working because my fsc codes are rejected(04-20-2023, 02:08 AM)adelin731 Wrote: have you managed to do the swap? Will I be able to get tool32 on it now once is already coded to the car? RE: Help needed - changing ENTRYNAV HU - maxxsp - 05-26-2023 (05-26-2023, 05:58 AM)adelin731 Wrote:(05-26-2023, 03:35 AM)maxxsp Wrote:I swapped my head unit also, but I got the hu_champ2 and I'm not able to get the navigation working because my fsc codes are rejected(04-20-2023, 02:08 AM)adelin731 Wrote: have you managed to do the swap? If your other FSC codes are working then there should be no need to wipe the HU with tool32 again. You can check FSCstatus in E-SYS to confirm your HU correctly reports your vehicle vin. I think you are facing the same problem as me. Your replacement HU has a map loaded on it that is not valid with your FSC. In my case the replacement HU has europe map data so my repair pack FSC code (for southeast asia map) cannot activate. I either need to buy new ROUTE FSC for 2022 map update or find the older map file. In your case you can generate new FSC for MOVE map using FSC generator and use the latest map file. RE: Help needed - changing ENTRYNAV HU - adelin731 - 05-26-2023 (05-26-2023, 07:20 AM)maxxsp Wrote:I never wiped the hu, I just bought it and VO coded to the car, that's all. So, if I'm right, I need to wipe it with tool32, then vo code and after that use the fsc repair kit. Do you mind explaining to me step by step, I never had to deal with maps and fsc codes. Thanks in advance.(05-26-2023, 05:58 AM)adelin731 Wrote:(05-26-2023, 03:35 AM)maxxsp Wrote:I swapped my head unit also, but I got the hu_champ2 and I'm not able to get the navigation working because my fsc codes are rejected(04-20-2023, 02:08 AM)adelin731 Wrote: have you managed to do the swap? RE: Help needed - changing ENTRYNAV HU - maxxsp - 05-26-2023 (05-26-2023, 09:54 AM)adelin731 Wrote:Open Tool32 and load your HU file "champ2.prg"(05-26-2023, 07:20 AM)maxxsp Wrote:I never wiped the hu, I just bought it and VO coded to the car, that's all. So, if I'm right, I need to wipe it with tool32, then vo code and after that use the fsc repair kit. Do you mind explaining to me step by step, I never had to deal with maps and fsc codes. Thanks in advance.(05-26-2023, 05:58 AM)adelin731 Wrote:(05-26-2023, 03:35 AM)maxxsp Wrote:I swapped my head unit also, but I got the hu_champ2 and I'm not able to get the navigation working because my fsc codes are rejected(04-20-2023, 02:08 AM)adelin731 Wrote: have you managed to do the swap? - Find job: steuern_persistency_clear (might be a variation of this depending on HU type) - Type 0x01 in the argument box - Double click on job to run Then use E-SYS, Comfort mode>FSC to load your repair pack certs and install FSC codes RE: Help needed - changing ENTRYNAV HU - adelin731 - 05-26-2023 (05-26-2023, 11:17 AM)maxxsp Wrote:That's great, but where do i get the hu file "champ2.prg" from?(05-26-2023, 09:54 AM)adelin731 Wrote:Open Tool32 and load your HU file "champ2.prg"(05-26-2023, 07:20 AM)maxxsp Wrote:I never wiped the hu, I just bought it and VO coded to the car, that's all. So, if I'm right, I need to wipe it with tool32, then vo code and after that use the fsc repair kit. Do you mind explaining to me step by step, I never had to deal with maps and fsc codes. Thanks in advance.(05-26-2023, 05:58 AM)adelin731 Wrote:(05-26-2023, 03:35 AM)maxxsp Wrote: Yes I bought a used ENTRYNAV with MOST port.I swapped my head unit also, but I got the hu_champ2 and I'm not able to get the navigation working because my fsc codes are rejected RE: Help needed - changing ENTRYNAV HU - maxxsp - 05-26-2023 (05-26-2023, 11:19 AM)adelin731 Wrote:(05-26-2023, 11:17 AM)maxxsp Wrote:That's great, but where do i get the hu file "champ2.prg" from?(05-26-2023, 09:54 AM)adelin731 Wrote:Open Tool32 and load your HU file "champ2.prg"(05-26-2023, 07:20 AM)maxxsp Wrote:I never wiped the hu, I just bought it and VO coded to the car, that's all. So, if I'm right, I need to wipe it with tool32, then vo code and after that use the fsc repair kit. Do you mind explaining to me step by step, I never had to deal with maps and fsc codes. Thanks in advance.(05-26-2023, 05:58 AM)adelin731 Wrote: I swapped my head unit also, but I got the hu_champ2 and I'm not able to get the navigation working because my fsc codes are rejected It's from within the Tool32 installation, you need to open that file RE: Help needed - changing ENTRYNAV HU - bimmerwork - 03-12-2024 (05-26-2023, 09:54 AM)adelin731 Wrote:(05-26-2023, 07:20 AM)maxxsp Wrote:(05-26-2023, 05:58 AM)adelin731 Wrote:(05-26-2023, 03:35 AM)maxxsp Wrote:(04-20-2023, 02:08 AM)adelin731 Wrote: have you managed to do the swap?HI HOW DO YOU CLEAR FSC ON ENTRY NAV TO PUT THE REPAIR CODE |