TPMS coding for G30 - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: TPMS coding for G30 (/showthread.php?tid=4950) |
TPMS coding for G30 - StonieG30 - 01-03-2023 Dear all I plan to restrofit TPMS to my 2019 G30. In Thailand the BMWs are without TPMS (only the calculates system without sensors). Since the antenna for TPMS is already installed, I will need to install the sensors in the tyres and code. For the coding, the VO (FA) coding is clear, but I am not sure what else I need to code. Can someone help me here? Best regards and Happy new Year ;-) RE: TPMS coding for G30 - TheNine90 - 01-03-2023 Add 2VB and code DSC, HU_NBT_EVO, Kombi, BDC RE: TPMS coding for G30 - StonieG30 - 01-04-2023 Thank you for the reply RE: TPMS coding for G30 - Alec01 - 02-13-2023 (01-03-2023, 08:17 AM)StonieG30 Wrote: Dear all Hi Stonie, When you say "only the calculates system without sensors", how the system knows exactly when the tyre goes under minimun pression ? I also owns a g30 without tpms and I am wondering how the car can know I need to go to the station if there is no sensor inside the tyre. RE: TPMS coding for G30 - TheNine90 - 02-14-2023 It uses the speed sensors in each wheel and compares rotational speeds, The system reports any significant loss of pressure in one tire in relation to another. If a tire loses pressure, its rolling radius changes, and this in turn alters the speed of rotation. This change is detected and is reported as a flat tire. RE: TPMS coding for G30 - Minde90 - 02-15-2024 (01-03-2023, 07:38 PM)TheNine90 Wrote: Add 2VB and code DSC, HU_NBT_EVO, Kombi, BDC Hi reviving an old thread. Am planning to retrofit the tire sensors. Can I check, after adding the 2VB VO via esys (currently using BimmerUtility), the coding for the respective modules (DSC, HU_NBT_EVO, Kombi, BDC) is automated, i.e.: no additional coding required? Thanks! RE: TPMS coding for G30 - TheNine90 - 02-15-2024 Its full vo coding no need to do extra fdl coding |