+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) (/showthread.php?tid=5176)
BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) - KVD-NL-BMW - 03-07-2023
Hello from The Netherlands!
Im a private owner, no dealer, so sorry for my limited technical knowledge:
With my E-sys (22.10.00 and PsdzData 4.40.12) I can Read FA, read ECU's, VO Code, FDL code, but I do not see my SAS ECU. My car is running / or in diagnostic mode. Somewhere I read that may be an issue on G-series (although this is an F-serie but in E-sys the target is S18A). What I read:
- Using a backup SVT this could possible be resolved? But I'm no dealer just a private person. How do I safely write an SVT having no backup?
- Using I-step, a target SVT could be made? (where do I find my I-step and what would be the next actions to create a SVT safely?)
Anyway, any suggestions are welcome to get my SAS ECU visible.
RE: BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) - TheNine90 - 03-08-2023
Are there any fault codes? Try resetting flexray and see if SAS is being detected.
RE: BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) - KVD-NL-BMW - 03-08-2023
(03-08-2023, 11:19 AM)TheNine90 Wrote: Are there any fault codes? Try resetting flexray and see if SAS is being detected.
Thank you 90,
The knowledge I do not have is most likely my problem: I'm a private owner not a professional. But let me check with you:
- Flexray (never heard of that so i googled): Do I need ISTA for that? And is ity safe to use ISTA? No need to flash or recode every ECO doimg the flexray reset?
- And if so can I just download ISTA (P or D) and start using it?
Rgrds KvD
RE: BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) - TheNine90 - 03-08-2023
you can use tool32 to reset flexray. After resetting flexray code the SAS using esys. You can use ISTA to relearn flexray but tool32 is faster.
RE: BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) - KVD-NL-BMW - 03-09-2023
(03-08-2023, 06:58 PM)TheNine90 Wrote: you can use tool32 to reset flexray. After resetting flexray code the SAS using esys. You can use ISTA to relearn flexray but tool32 is faster.
Think I have the solution:
The F44 equiped with 5AQ + 5AS + 5DF (European version) has no SAS on board. Please see this picture:
https://x3.xbimmers.com/forums/showpost.php?p=27324245&postcount=5
Anyway thanks for your time!
RE: BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) - TheNine90 - 03-09-2023
When you calculate svt soll does it appear?
RE: BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT) - KVD-NL-BMW - 03-12-2023
(03-09-2023, 02:49 PM)TheNine90 Wrote: When you calculate svt soll does it appear?
I think I dont need to re-calculate that, since the system indicates that no SAS module is build-in in this series. SAS seems to be optional and only required for 5AU (5AU is btw not an option on the F44 series in The Netherlands):
- In the DSC_BRS ECU module is indicated: C_SAS_verbaut=nicht verbaut (means that there is no SAS module installed)
To be precise, I have:
- 5AQ= active guard plus
- 5AS= Driving assistant
- 5DF= ACC + Stop & Go - (5AT is NOT the same as 5AS + 5DF)
- 5DM= Parking Assitance system
This also includes S430 (Outside mirror dip) and S431 (inner mirror dip) and S8TF (Active Pedestrian Warning.)