+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5)
+--- Forum: Request Section (https://www.bimmerscene.com/forumdisplay.php?fid=22)
+--- Thread: G20 Donor EPS (/showthread.php?tid=5178)
G20 Donor EPS - evilmortyca - 03-08-2023
Hello all,
I had to replace my steering EPS motor with one from a used rack. I only replaced the motor however ISTA + is not reading EPS and it states “mount” hardware. Should I try to replace the entire rack instead of only motor ? My Only problem is that’s the ecu is not being read so that I can code through ESYS or ISTA +. Wondering if a hard ware issue or it’s because it’s a donor part
Thank you everyone in advance
RE: G20 Donor EPS - TheNine90 - 03-08-2023
Try resetting flexray and see if EPS is being detected. Make sure connections are good.