+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? (/showthread.php?tid=5215)
ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - Blackbird_84 - 03-24-2023
Is it known what was the last version of ÎŜ†Ä-D that supported the E36 (ADS)??
Thanks you!!
RE: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - DiagnosticFreak - 05-06-2023
I don't know what Interface you mean with ADS.
But with the BMW ÏçØɱ NEXT I used the newest ÎŜ†Ä-D at an e36 1995 without Problems.
RE: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - Blackbird_84 - 05-07-2023
(05-06-2023, 08:25 PM)DiagnosticFreak Wrote: I don't know what Interface you mean with ADS.
But with the BMW ÏçØɱ NEXT I used the newest ÎŜ†Ä-D at an e36 1995 without Problems.
The ADS (or KW-71) was the protocol used in diagnostic bus in BMW pre-1995, for example I use a special adapter ADS-RS232 to connect with Motronic ECU in a E36 M3 S50 Engine with DIS v57 or ÏÑÞÀ.
With ÎŜ†Ä-D 4.23 I can Connect with BMW Pre 95 perfectly but I haven't tested with others most recent versions of ÎŜ†Ä.
The last week I connected to a E38 740D with ÎŜ†Ä-D 4.39.20 and this version could't diagnostic correctly the DDE4.1 Master and Slave Engine ECU, Don't show Functions such at "clear adaptations, compression test, rough running etc.." only showed "Read and Clear Faults Code", But with 4.32.15 were are available all functions.
RE: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - robertoz - 01-06-2024
Have you connected to the ads interface via the ÎŜ†Ä d program? wow.. I didn't hear that was possible
RE: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - Blackbird_84 - 01-28-2024
(01-06-2024, 03:29 PM)robertoz Wrote: Have you connected to the ads interface via the ÎŜ†Ä d program? wow.. I didn't hear that was possibleNo, i am using ÏçØɱ A2 (or ÏçØɱ clone) to connect with pre 95 model with ADS protocol.
RE: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - ohmycars - 02-03-2024
so the ads adapter is for dis and ÏÑÞÀ only and a2 is for ÎŜ†Ä? would ÎŜ†Ä somehow read the ads adapter via edi.ini too(like ÏÑÞÀ does?) or not?
RE: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - bmwstephen - 11-25-2024
(05-06-2023, 08:25 PM)DiagnosticFreak Wrote: I don't know what Interface you mean with ADS.
But with the BMW ÏçØɱ NEXT I used the newest ÎŜ†Ä-D at an e36 1995 without Problems.
can you recommend the best cable that can interface with ADS?
RE: ÎŜ†Ä-D last version to support E36 (ADS Protocol)?? - YERDEZ - 01-01-2025
Hi,
Can use RS232 USB Adaptater or is it mandatory to get a port series laptop for ads adapter & ÏÑÞÀ ads , I never managed to connect with ÏçØɱ and ÎŜ†Ä 4.32.15 . I did get a kind of vintage dis diagnostic interface windows on ÎŜ†Ä running , it would try to start vehicle test and finally find nothing. Did you edit ediabas.ini with ÏçØɱ could you share your ediabas file or provide help with your configuration . Maybe ÎŜ†Ä 4.32.15 don't support ads protocol.Many thx . keep us apprised