Service counter wrong values correction - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Service counter wrong values correction (/showthread.php?tid=5227) |
Service counter wrong values correction - ivanivanusic - 03-29-2023 Hi everyone, Somebody in service reset twice (I think) front and rear pads counter, and now my car shown 3 brake pads change(front and rear) instead of 2. In whole car life, I changed pads twice only. Does anybody know how to correct counter(delete 1 value), without losing all my data? RE: Service counter wrong values correction - TheNine90 - 03-29-2023 You can use tool32 and modify the counter. Load dsc.prg(use correct dsc) choose cbs_daten_lesen In the results, COU_RSTG_CBS_MESS_WERT This value is the number of times the CBS counter has been reset. AVAI_CBS_WERT_BR_V Availability BR_V in %, for end-of-line test procedure COUNT_CBS_VALUE_BR_V service counter brake lining in front, for test procedure end of line AVAI_CBS_WERT_BR_H Availability BR_H in %, for end-of-line test procedure COUNT_CBS_VALUE_BR_H service counter brake lining rear, for test procedure end of line Br_v Front brake pad Br_h Rear brake pad To reset select cbs_reset job To reset Front brake pad sensors, under center column (Arguments), type: Br_v;100;31 Click Jobs menu and select Start Job Once Only (or just press F5) To reset Rear brake pad sensors, under center column (Arguments), type: Br_h;100;31 Click Jobs menu and select Start Job Once Only (or just press F5) 31 is the CBS_NUMBER_SERVICE 100 is the CBS_AVAILABILITY Select appropriate values based on the percentage from the data read. |