Bimmer Scene - Latest BMW Coding / Retrofits / Maps
Have I bricked it..?? - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Have I bricked it..?? (/showthread.php?tid=5250)



Have I bricked it..?? - shawminator - 04-06-2023

Hi all
I’ve done some FDL coding to get my car operating how I like it successfully using Esys / launcher pro etc monkey fashion. Because I had become comfortable using Esys and because to enable full screen CarPlay I required an I-step version above hu-nbt evo K I decided to have a go at flashing. Again following useful guides everything went as described, all progress bars filled to 100% and unit reset when completed. Everything works except nav that is stuck on “loading”. This means I can’t check the hu-nbt eve version.
When I run Esys again the I-step shipment and I-step current have not changed. Also when I run flashing again, when TAL calculating, at the point when checking swe software units before clicking start, there is no hu-nbt in the matrix
Cheers


RE: Have I bricked it..?? - TheNine90 - 04-06-2023

did you ever use FSC patch using feature installer?


RE: Have I bricked it..?? - shawminator - 04-06-2023

(04-06-2023, 12:55 PM)TheNine90 Wrote: did you ever use FSC patch using feature installer?
Hi
i downloaded it a few weeks ago and it sent my anti virus into meltdown so didn’t pursue. Do you have a copy that works..?


RE: Have I bricked it..?? - marcellino94 - 04-06-2023

you need fsc repair kit, I can provide it, you can write to me privately


RE: Have I bricked it..?? - shawminator - 04-06-2023

(04-06-2023, 01:56 PM)marcellino94 Wrote: you need fsc repair kit, I can provide it, you can write to me privately
Hi
shawminator@sky.com
cheers