ISTA/P Loader - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5) +--- Forum: Request Section (https://www.bimmerscene.com/forumdisplay.php?fid=22) +--- Thread: ISTA/P Loader (/showthread.php?tid=5352) |
ISTA/P Loader - aade - 05-10-2023 Hi, With ISTA-P Loader 6.1F I have the option to use a K+DCAN cable (I don't have an ICOM. BMW will sell me one, but they don't come in stock anytime soon. And I really don't know what to buy in terms of a replica model), but it doesn't want to start ISTA/P 3.71. I have an earlier ISTA/P, which works fine but it's an older version. The ISTA-P Loader that seems to start ISTA/P 3.71 is version 6.6, but it doesn't seem to want to let me use a K+DCAN cable. Am I out of luck or is there a way to get ISTA/P 3.71 to work with 6.1F or some way of convincing 6.6 to let me use a K+DCAN cable? Thanks in advance to all you gurus out there. RE: ISTA/P Loader - TheNine90 - 05-14-2023 Have you tried the ISTA-P_Loader_fix? RE: ISTA/P Loader - aade - 05-15-2023 (05-14-2023, 07:03 AM)TheNine90 Wrote: Have you tried the ISTA-P_Loader_fix?Thank you for checking in, no I have not. I have no idea what that is or where to look. A quick google search for "ISTA-P_Loader_fix" doesn't bring me to anything obvious, at least not to me. I'd be much obliged if you'd let me know where to look and for what. RE: ISTA/P Loader - TheNine90 - 05-15-2023 Try these fixes for ista p RE: ISTA/P Loader - aade - 05-15-2023 (05-15-2023, 11:19 AM)TheNine90 Wrote: Try these fixes for ista pThanks, I will try these. Am I to assume that these will work with 3.71? RE: ISTA/P Loader - TheNine90 - 05-15-2023 Not sure about that RE: ISTA/P Loader - aade - 05-16-2023 Thanks for your support. I tried using your suggested methods but I ended up breaking ISTA/P 3.71. I think I may need exactly the version you suggested, so I'll look for ISTA/P 3.69 and continue there. RE: ISTA/P Loader - aade - 06-06-2023 For those of you ending up looking for a solution to this, ISTA/P 3.71 will not load with Loader 6.1F. It will only load with 6.6L. At first I was bummed out by this, but certain functions of ISTA/P should really not be done without a connection to the MOST interface. For this an ICOM is needed (at least I don't know of a different way). So to code or update software, you really should use an ICOM. This is as far as my research goes. RE: ISTA/P Loader - kkkkk - 11-19-2023 (06-06-2023, 04:14 PM)aade Wrote: For those of you ending up looking for a solution to this, ISTA/P 3.71 will not load with Loader 6.1F. It will only load with 6.6L. At first I was bummed out by this, but certain functions of ISTA/P should really not be done without a connection to the MOST interface. For this an ICOM is needed (at least I don't know of a different way). So to code or update software, you really should use an ICOM. This is as far as my research goes. ISTA/P Loader 6.1 works fine with 3.71! You only need to change in ISTA-P folder the "application.xml" <?xml version="1.0" encoding="utf-8"?> <application name="Argonaut" distributionVersion="71.0.000" change to <application name="Argonaut" distributionVersion="3.71.0.000" then start. Works like a charme. |