EPS communication problem - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: EPS communication problem (/showthread.php?tid=5359) |
EPS communication problem - pvkosherov - 05-13-2023 Hello, after battery drain my car can’t see the eps module. I’ve tried code vcm but without success. There is always end with negative response error and Ista can’t see module. Wiring is ok, but I think there is flexray signal problem from zgw. RE: EPS communication problem - TheNine90 - 05-13-2023 Reset flexray and try to read the module RE: EPS communication problem - juantg93 - 05-13-2023 maybe you need start flexray with ista or tool32 if you cant whit ista. RE: EPS communication problem - pvkosherov - 05-15-2023 This was first that I tried but with no success. After the I saw with oscilloscope that signal is not typical flexray signal, and after that change zgw with other and everithing was ok since then. Thanks for help ! |