Bimmer Scene - Latest BMW Coding / Retrofits / Maps
HUD not working on G30 - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: HUD not working on G30 (/showthread.php?tid=5367)

HUD not working on G30 - benibeni - 05-17-2023

Hello dear members, HUD its not working on my G30, are shown 2 errors, i dont know if those has to be with HUD, also when i go to HUD control unit those values are shown.

thanks

RE: HUD not working on G30 - adelin731 - 05-17-2023

HUD not working because is taking info from the kombi and you have a voltage supply problem to the kombi, as per the second error, the DAB aerial antenna is missing or not connected to the headunit but this will not affect the HUD.

RE: HUD not working on G30 - benibeni - 05-17-2023

(05-17-2023, 12:02 PM)adelin731 Wrote: HUD not working because is taking info from the kombi and you have a voltage supply problem to the kombi, as per the second error, the DAB aerial antenna is missing or not connected to the headunit but this will not affect the HUD.

Hello bro, thanks for the answer tonight im going to check Fuses, if everything ok need to check about wiring right ?

RE: HUD not working on G30 - adelin731 - 05-17-2023

(05-17-2023, 12:32 PM)benibeni Wrote:
(05-17-2023, 12:02 PM)adelin731 Wrote: HUD not working because is taking info from the kombi and you have a voltage supply problem to the kombi, as per the second error, the DAB aerial antenna is missing or not connected to the headunit but this will not affect the HUD.

Hello bro, thanks for the answer tonight im going to check Fuses, if everything ok need to check about wiring right ?
Yea, so first make sure the kombi hasn't got that voltage supply problem them see what happens

RE: HUD not working on G30 - lukaszb - 05-31-2023

HUD is supplied by KOMBI.
You should check your cable at first.
There are 4 pin conection + 2 pin with supply.

At 5 pin should be +, at 6th pin should be ground.