Side/Daytime Lights error. - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Side/Daytime Lights error. (/showthread.php?tid=5375) |
Side/Daytime Lights error. - MJT95 - 05-18-2023
RE: Side/Daytime Lights error. - adelin731 - 05-18-2023 use bimmercode and go to FEM, code the LED conversion on daytime running lights and position lights. RE: Side/Daytime Lights error. - MJT95 - 05-18-2023 (05-18-2023, 08:56 PM)adelin731 Wrote: use bimmercode and go to FEM, code the LED conversion on daytime running lights and position lights.Just checked, they are all active on LED conversion apart from fog lights. Is there a way in expert mode to disable the ECU checking for light faults? RE: Side/Daytime Lights error. - adelin731 - 05-19-2023 (05-18-2023, 09:12 PM)MJT95 Wrote:I don't think so.(05-18-2023, 08:56 PM)adelin731 Wrote: use bimmercode and go to FEM, code the LED conversion on daytime running lights and position lights.Just checked, they are all active on LED conversion apart from fog lights. Is there a way in expert mode to disable the ECU checking for light faults? RE: Side/Daytime Lights error. - TheNine90 - 05-19-2023 Did you confirm if the headlights were coded using correct headlights type? RE: Side/Daytime Lights error. - MJT95 - 05-19-2023 (05-19-2023, 06:46 AM)TheNine90 Wrote: Did you confirm if the headlights were coded using correct headlights type?that’s the one thing i’m not sure of as I assumed that the coders that fitted these custom lights would of made sure of that, how would I go about checking this? i’m starting to wonder if the F22 lights that are in there, may still have the f21 headlight module which is causing the ECU to not talk properly and/or the actual module has gone and needs replacing (05-19-2023, 06:12 AM)adelin731 Wrote:on a different thread, someone posted about coding kombi- Cluster: 3001 CC_ID_Sperre > CC_AKTIVERUNG_6 > change from FF to F3(05-18-2023, 09:12 PM)MJT95 Wrote:I don't think so.(05-18-2023, 08:56 PM)adelin731 Wrote: use bimmercode and go to FEM, code the LED conversion on daytime running lights and position lights.Just checked, they are all active on LED conversion apart from fog lights. Is there a way in expert mode to disable the ECU checking for light faults? RE: Side/Daytime Lights error. - TheNine90 - 05-19-2023 Do a visual check and compare with pictures online. You can also find it written on the housing like adaptive, led. RE: Side/Daytime Lights error. - 9mmkungfu - 06-01-2023 Did you figure it out? |