Bimmer Scene - Latest BMW Coding / Retrofits / Maps
4.39.20 ISTA "Programming Data: n/a" - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5)
+--- Forum: Request Section (https://www.bimmerscene.com/forumdisplay.php?fid=22)
+--- Thread: 4.39.20 ISTA "Programming Data: n/a" (/showthread.php?tid=5388)

4.39.20 ISTA "Programming Data: n/a" - devildevil87 - 05-22-2023

hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~

RE: 4.39.20 ISTA "Programming Data: n/a" - adelin731 - 05-22-2023

(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.

RE: 4.39.20 ISTA "Programming Data: n/a" - devildevil87 - 05-27-2023

Thanks ~
I can do programming now~
if I want to link e-sys to the same database?
What Should I do?
Or I need create separate Psdz file to link E-sys?

RE: 4.39.20 ISTA "Programming Data: n/a" - adelin731 - 05-27-2023

(05-27-2023, 01:36 AM)devildevil87 Wrote: Thanks ~
I can do programming now~
if I want to link e-sys to the same database?
What Should I do?
Or I need create separate Psdz file to link E-sys?
Just create a symlink and share same psdzdata folder between ista and esys

RE: 4.39.20 ISTA "Programming Data: n/a" - Meguinness - 07-10-2023

Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped??? thanx
(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped and then copied to the data_swi ??? thanx

RE: 4.39.20 ISTA "Programming Data: n/a" - adelin731 - 07-10-2023

(07-10-2023, 05:23 PM)Meguinness Wrote: Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped??? thanx
(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped and then copied to the data_swi ??? thanx
yes it needs to be unzipped, so you paste the psdzdata folder into data_swi folder

RE: 4.39.20 ISTA "Programming Data: n/a" - TheNine90 - 07-10-2023

(05-27-2023, 01:36 AM)devildevil87 Wrote: Thanks ~
I can do programming now~
Sure? This is the version that doesnt need a licence?
I read somewhere that it does not have programming license.
Do you get the constant error about The programming system could not be initialised?

RE: 4.39.20 ISTA "Programming Data: n/a" - rew - 10-17-2023

(07-10-2023, 06:52 PM)adelin731 Wrote:
(07-10-2023, 05:23 PM)Meguinness Wrote: Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped??? thanx
(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped and then copied to the data_swi ??? thanx
yes it needs to be unzipped, so you paste the psdzdata folder into data_swi folder

Hi, please tell me, I use ISTA 4.36.40, downloaded the latest PSdZData_Lite_4.43.31 , how do I update the data? I just need to replace all the files, whether I need to edit something in the registry or some other actions. I hope for your help, thank you.

RE: 4.39.20 ISTA "Programming Data: n/a" - davema8888 - 12-22-2023

(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Excellent info - just what I needed!

RE: 4.39.20 ISTA "Programming Data: n/a" - er9191 - 02-27-2024

Does anyone know where the error is here? I wanted to reset the service but it tells me there is no content and it shows everything in numbers

Have standalone 4.39.20 on it with psdzdata full 4.45.30. could psdzdata be faulty?

[Image: 429673687-3699976156996379-8842815449609636259-n.jpg]