ISTA-D 4.39.20 Standalone not connecting - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: ISTA-D 4.39.20 Standalone not connecting (/showthread.php?tid=5452) |
ISTA-D 4.39.20 Standalone not connecting - MixedMethodsBoy - 06-17-2023 Hi, I have installed ISTA-D 4.39.20 Standalone and tried to connect. My car also appears in the list (i4 m50), but when I click connect, the window closes and nothing else happens. I have a normal ENET connection, which I have also set in the settings. I tried with ignition on/off and diagnostic mode on/off, no difference. Any other software works without problems, like E-Sys, Carly or BimmerCode/BimmerLink. Does anyone have an idea what the problem could be? Errorlog attached. RE: ISTA-D 4.39.20 Standalone not connecting - adelin731 - 06-19-2023 try to use ista 4.32.15 RE: ISTA-D 4.39.20 Standalone not connecting - MixedMethodsBoy - 06-26-2023 (06-19-2023, 08:36 AM)adelin731 Wrote: try to use ista 4.32.15It worked, thank you! RE: ISTA-D 4.39.20 Standalone not connecting - Buzzy_mc3 - 07-29-2023 (06-19-2023, 08:36 AM)adelin731 Wrote: try to use ista 4.32.15i have the same problem too with the 4.39.20. at first it all worked fine even programming, after the ssd exchange when I reinstaled it, gives me the same problem. it doesn't connect. how could I solve it? on the first install it all worked fine. thanks |