+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: F97 X3M 2WD (/showthread.php?tid=5479)
F97 X3M 2WD - real.jug - 06-30-2023
Hey,
does somebody know how to get the 2WD Option in the F97 X3M? Some say, you have to flash the M5 Software but does someone have some instructions?
Thanks,
Julius
RE: F97 X3M 2WD - TheNine90 - 07-02-2023
You might need to change the typecode and use it for flashing
RE: F97 X3M 2WD - Nighteagle_67 - 09-13-2023
hey guys any solution? and no i dont want to buy a remote session. i am here to learn. from that what i know you have to flash dsc.
RE: F97 X3M 2WD - Edi-EZTuning - 09-14-2023
flashing HU and DSC using M5 F90 Typecode
RE: F97 X3M 2WD - ptsimps - 02-25-2024
I've tried messing around with this. I started with my stock FA, changed the typecode from TS03 to JF03, I had to remove a few SA items as they were not compatible with the M5 typecode, and was able to calculate an FP, then calculated and SVT. Going purely off the colors in the SVT Tree, it looks like only the SWFK file has changed in DSC3, and nothing has changed in HU_NBT2.
I'm a novice, so I'm a bit hesitant to just send it and code the DSC3 and HU_NBT2.
Anyone have any advice? I'd like to learn, not interested in a remote session. Thanks!
RE: F97 X3M 2WD - Sebi04.04 - 08-22-2024
Has anybody figured out on how to do this ? I would like to try on my X3M as well.
Thanks!
RE: F97 X3M 2WD - Joebie - 09-27-2024
(02-25-2024, 02:59 PM)ptsimps Wrote: I've tried messing around with this. I started with my stock FA, changed the typecode from TS03 to JF03, I had to remove a few SA items as they were not compatible with the M5 typecode, and was able to calculate an FP, then calculated and SVT. Going purely off the colors in the SVT Tree, it looks like only the SWFK file has changed in DSC3, and nothing has changed in HU_NBT2.
I'm a novice, so I'm a bit hesitant to just send it and code the DSC3 and HU_NBT2.
Anyone have any advice? I'd like to learn, not interested in a remote session. Thanks!
I managed to get through to being able to start the SVT calc, but under KIS Verification I'm not seeing the correct iStep info. Although, to be honest, I'm not sure I would code any of it even if I did get that completed LOL.
RE: F97 X3M 2WD - Ivanson - 10-07-2024
Can be done via coding only
RE: F97 X3M 2WD - RetrofitUK - 12-26-2024
HU_MGU
M_ALLRAD -> aktiv
M_MODUS -> 3_werte (00)
DKOMBI4
HMI_M_AWD_ENABLE -> anzeige_permanent
Now need to find parameters for DSC