+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: ISTA-D 4.39.20 problems (/showthread.php?tid=5578)
ISTA-D 4.39.20 problems - Haug530D - 08-01-2023
I have downloaded the standalone install of ISTA-D 4.39.20
From here, but i connect it to my E87 and start the "Complete Vehicle identification" and it says "it will take a moment" and then disapears, nothing more happens.
I did get some message about unable to excecute file 2019_vc_redist.x86.exe during install, could this be the problem?
I installed the Redist files and now i'm one step further.
I get this message:
"The vehicle could not be identified sucsessfully. check vehicle interface and "Pad Active"
RE: ISTA-D 4.39.20 problems - aade - 08-04-2023
Is this with a clone ICOM perhaps? If not, try reading this thread:
https://f30.bimmerpost.com/forums/showthread.php?t=1809461
RE: ISTA-D 4.39.20 problems - Haug530D - 08-04-2023
(08-04-2023, 01:55 PM)aade Wrote: Is this with a clone ICOM perhaps? If not, try reading this thread:
https://f30.bimmerpost.com/forums/showthread.php?t=1809461
Original Icom Next
(08-04-2023, 10:18 PM)Haug530D Wrote:(08-04-2023, 01:55 PM)aade Wrote: Is this with a clone ICOM perhaps? If not, try reading this thread:
https://f30.bimmerpost.com/forums/showthread.php?t=1809461
Original Icom Next is working, i get this error then i try with Enet cable.
RE: ISTA-D 4.39.20 problems - adelin731 - 08-10-2023
Just use 4.32.15 as 4.39.20 has a lot of errors
RE: ISTA-D 4.39.20 problems - aade - 08-10-2023
What does your EDIABAS.ini look like? Also your OBD.ini