+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ÎŜ†Ä+ connects but every tab is blank (/showthread.php?tid=5891)
ÎŜ†Ä+ connects but every tab is blank - ultimate-testesr - 11-29-2023
Hi all,
After using ė-šÝ§ for a long time to successfully program and flash modules, I now wanted to give ÎŜ†Ä+ a try.
I got the version 4.39.20 and it installed perfectly and also starts perfectly. I set the connection mode to ėšÝ§.
When I open the connection dialog, my ENET cable is listed with the VIN and IP of the car showing. I click that one, it starts loading, and then nothing.
Tabs like Vehicle Information are unlocked, but everything on that tab is simply empty. No list of ECU's, no data on the dashboard like mileage, vin, etc. Everything is - or empty.
What would be the cause of this? The cable should be good, I used it for years on ė-šÝ§ successfully. I also tried EDIABAS as connection method, verifying that the EDIABAS config file says ENET as method but that results in exactly the same behavior (though, no VIN showing in connection window but then after connecting it displays everything blank).
Kind regards and thank you in advance.