+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: 3AG F10 Reversing Camera (/showthread.php?tid=601)
3AG F10 Reversing Camera - it3_magic - 08-07-2020
Hi guys, its probably straight forward but always good to have a wiring diagram.
Anyone have one for retrofitting reversing camera to f10?
have the module, wiring, camera and handle here.
Many Thanks
RE: 3AG F10 Reversing Camera - it3_magic - 08-07-2020
In Case someone was looking so far i Know:
Switch mounted in the boot, Power wire goes to rear fuse box socket F121 in ZW2*10B
If you bought a harness its a green wire
From switch to camera you have video cable with grounding point along the way.
From switch to front of car you have one ground cable on the main loom,
The 3 pins go to quadlock
- Yellow - pin 21,
- White - pin 24
- Shield (clear) to pin 23
Orange and light green are can wires that go to same colour wires in IHKA connector
Finally, add 3GA to FA and code NBT and PDC.
Also, might need to run ista and calibrate camera.
Ill be doing this on tuesday will follow up.
RE: 3AG F10 Reversing Camera - it3_magic - 08-11-2020
All went smooth, pretty simple just time consuming.
https://www.facebook.com/MCODINGIRELAND/posts/302130781209526