Latest .PRG Tool32 files for F & G series ECUs (S18A) - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Latest .PRG Tool32 files for F & G series ECUs (S18A) (/showthread.php?tid=6146) |
Latest .PRG Tool32 files for F & G series ECUs (S18A) - xperiance - 02-18-2024 Hello, where canI get the latest .prg files for S18A ECU debugging and controlling for Tool32? what i found was SP-Daten 71 but there is no S18A inside. is there any newer version i can get somewhere? thank you. RE: Latest .PRG Tool32 files for F & G series ECUs (S18A) - TheNine90 - 02-18-2024 ista should have them also. Look in the ediabas ECU folder RE: Latest .PRG Tool32 files for F & G series ECUs (S18A) - xperiance - 02-18-2024 i have Ista 4.32.15 installed and yes there are the .prg files inside the ECU directory. Thanks, i didn't know that i can find this in ISTA already. also it looks like there are also files with "g_" at the bginning, are this the files dedicated to the G series? or how can i found out. which files are for the S18A model cars? RE: Latest .PRG Tool32 files for F & G series ECUs (S18A) - bradsm87 - 02-18-2024 prg files are specific to the module rather than the vehicle. Which module to you want to work on? If engine, which engine? RE: Latest .PRG Tool32 files for F & G series ECUs (S18A) - xperiance - 02-19-2024 at the moment on no specific one, i just want to learn how. currently i played around with night vision 3 ECU prg file.. nivi3.prg but there was also a nivi2, nve, nvc g_nivi file etc. so i am not sure what is the right one as it looks i can do a connect with all of them but yah, i don't understand the logic behind. |