Bimmer Scene - Latest BMW Coding / Retrofits / Maps
HU_NBT wrong bus error when writing SVT for an unrelated change - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: HU_NBT wrong bus error when writing SVT for an unrelated change (/showthread.php?tid=6154)

HU_NBT wrong bus error when writing SVT for an unrelated change - bradsm87 - 02-21-2024

I'm preparing to permanently remove my TCB. I removed the 6AC and 6AE options and added the HO-Wort "TELD" on the FA and wrote the FA to the VCM.

I read the SVT from the VCM, removed TCB, saved it then opened the file in the VCM section. When I went to write SVT, it gave the error attached. I did not proceed.

I then did a "Read (ECU)" and compared the files of the SVT read from the VCM and the "Read (ECU)" (I'll call it "actual") one and found a difference:

SVT from VCM: <ecuBusConnectionInfo busType="ETHERNET" busID="15"/>

SVT actual: <ecuBusConnectionInfo busType="ETHERNET_63" busID="22"/>

Should I:

1) Ignore the error and write the VCM based on the SVT taken from the VCM.

2) Use the SVT data from the "Read (ECU)" to write to the VCM.

RE: HU_NBT wrong bus error when writing SVT for an unrelated change - TheNine90 - 02-21-2024

Delete the ecu from the svt and write to vcm. Ignore the error

RE: HU_NBT wrong bus error when writing SVT for an unrelated change - bradsm87 - 02-21-2024

(02-21-2024, 10:42 AM)TheNine90 Wrote: Delete the ecu from the svt and write to vcm. Ignore the error

After reading more since I posted the thread, it seems that NBT probably should list ETHERNET_63 busID 22 rather than ETHERNET busID 15. What puzzles me is why Ethernet busID 15 was ever in the SVT in the first place for NBT.

RE: HU_NBT wrong bus error when writing SVT for an unrelated change - bradsm87 - 02-22-2024

I ended up going for an option 3 haha.

I edited the file from the VCM and changed the HU_NBT to busType="ETHERNET_63" busID="22". No error. No issues.