[SOLVED] Issue with US Sidemarkers on EU Spec E92 - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2) +--- Thread: [SOLVED] Issue with US Sidemarkers on EU Spec E92 (/showthread.php?tid=6194) |
[SOLVED] Issue with US Sidemarkers on EU Spec E92 - souljahh - 03-05-2024 Edit: Solved, they work as they should now Hey, I have been trying at this for a couple hours now - to no avail, i'm trying to enable the US Sidemarkers on my 2012 EU Spec E92. When the engines not running, both sidemarkers stay on with daytime running lights and lowbeams, however when i turn the engine on, they start flickering and simply turn off (my front turn signals also stop working until i restart the engine). Here's an overview of the values I've tried: SIDEMARKER_US_MIT_FRA_V to aktiv PWM_FRA_V_FKT_SIDEMARKER to wert_02 KALTUE_SML_M2_8_M2_32 to nicht_aktiv WARMUE_SML_M2_8_M2_32 to nicht_aktiv DRL_TFL_MIT_SML_3R to aktiv my nfrm module is: FRM3_E89.C32 RE: Issue with US Sidemarkers on EU Spec E92 - eXslide89 - 03-06-2024 Hello, it is best to write the control unit to standard with an empty .man file. US parking lights are the following parameters: DRL_V_GEDIMMT active DRL_VALUE_DIMMING value_01 slightly dimmed, dazzles value_02 strongly dimmed or FRM1 [US Sidemarker] SIDEMARKER_US active PWM_SIDEMARKER_BLK_V value_01 - off value_02 - 9.2V value_03 - 8.2V value_04 - 6.0V |