(09-16-2020, 12:27 AM)XuLeTZ Wrote:

(09-15-2020, 09:51 PM)WINKey Wrote: Is ISTA P available?

Why you need it? ISTA D should be enough. I have ISTA P as well, but it has 26gB.

(04-16-2021, 08:36 AM)XuLeTZ Wrote: Files uploaded on google drive as well

(04-17-2021, 01:45 AM)WasK Wrote:

(04-16-2021, 08:36 AM)XuLeTZ Wrote: Files uploaded on google drive as well

Thank you for taking the time to upload it to Gdrive. God has a special place in heaven for people like you lol. Much appreciated!

(04-17-2021, 09:04 AM)pz_szczecin Wrote: Anyone else have a problem with copy not being activated or expired? Noticed that even shortcut logo on pulpit does not display correctly

(04-17-2021, 07:43 PM)XuLeTZ Wrote:

(04-17-2021, 09:04 AM)pz_szczecin Wrote: Anyone else have a problem with copy not being activated or expired? Noticed that even shortcut logo on pulpit does not display correctly

You need to install 2019_VC_redist.x64.exe and 2019_VC_redist.x86.exe even if you have x64 windows. Is a must to install VC_redistx86 and x64 as well and the license message will go away. If still shows up, remove ISTA and install again.
I installed it now on 4 different laptops with W10, x64, version 20H2 with all Windows updates and is working perfectly fine.
I never post ISTA without checking it on my test laptop first.
Also make sure to install vs90_piaredist.exe from Tools folder as well.

(08-17-2020, 10:29 PM)XuLeTZ Wrote: This thread is for my Standalone Releases, always the latest. HUGE THANKS TO SEDOY FROM CT and @dragosv6 for helping with google drive for faster download rates


Please REP & Thank you if this helps you
If you have no idea how to install ISTA manually, use my installer!!!
Please don't ask me for another language!!!


ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.28.3x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Download directory
|  ista_standalone_installer_4.28.42.exe
|  ISTA_v4.28.42.22910.7z (required)
|  BLP_4.28.41.7z (required)
|  SDP_4.28.41.7z (if needed)
|  ExecutionBreak_4.28.41 (optional)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_4.28.40.7z (required)
        DE_4.28.40.7z (if needed)
        ZH_4.28.40.7z (if needed and if available)
        GLOBAL_4.28.40.7z (required)

Standalone: ISTA 4.28.42.22910 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.28.40 / BLP 4.28.41 / SDP 4.28.41
Standalone Installer (all above files/dirs must be present in the same directory):  v4.28.42


Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)

(04-06-2021, 08:53 AM)junobg Wrote: @mariorossi I don't use power supply as I don't use ISTA for flashing. Normally I leave the engine running and occasionally get a warning that the voltage is higher than the values expected by ISTA, but that's due to the alternator charging the battery. I normally close those messages and carry on.